Drawn stainless steel tube DIN EN ISO 1127, outside diameter 12 mm, wall 1 mm, 1.4301

This stainless steel tube to DIN EN ISO 1127 carries media through the plant in a drawn wall without a weld seam. This version comes with 12 mm outside diameter and 1 mm wall thickness. A further figure is a wall thickness of 1 mm.

Benefits

• Drawn without a weld seam to DIN EN ISO 1127, outside diameter 12 mm.
• Wall thickness 1 mm for a working pressure of -1 to 230 bar.
• Material 1.4301, heat treated and supplied with a matt or bright annealed surface.
• Every tube is eddy current tested to 100 percent under 80 bar pressure.
• Tolerances to DIN EN ISO 1127 in D4/T3, above 42 mm outside diameter in D3/T3.

Applications

In hydraulic and process lines the tube 12 x 1 mm carries the medium at a working pressure of -1 to 230 bar.

Standards and conformity

Outside diameter 12 mm and wall thickness 1 mm follow DIN EN ISO 1127 with tolerance D4/T3.