Stainless steel ball valve, DVGW, Rp 2", -0.9 to 40 bar, thread G Rp 2"

In daily operation this item shuts off the flow in the line with a quarter turn, and it is supplied as a stainless steel ball valve. The recorded ratings are thread G Rp 2" and mounting flange to ISO 5211 F05. The material is stainless steel 1.4408. For the seals the data gives PTFE.

Benefits

• full bore in the open position and therefore low pressure loss, verified by thread G Rp 2"
• mounting flange to ISO 5211 F05
• material stainless steel 1.4408 as stated in the data
• sealing material PTFE
• temperature range -20 to +150 °C
• made to DVGW

Applications

In service the version is found in pipework, compressed air networks and plant construction. For the media the data sheet gives water, oil, compressed air, vacuum, fuels, solvents, aggressive media, gases nach DVGW Arbeitsblatt.

Standards and conformity

Manufacture follows DVGW and ISO 5211.