Images are examples, some edited with AI. The technical data are authoritative. AI notice
ISO cylinder DSBC-...-125- - - Festo 1722457
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Stroke | 1 ... 2800 mm |
|---|---|
| Piston diameter | 125 mm |
| Piston rod thread | M27x2, M16 |
| Based on standard | ISO 15552 |
| Cushioning | Elastic cushioning rings/plates at both ends, Self-adjusting pneumatic end-position cushioning, Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Conforms to standard | ISO 15552 |
| Piston-rod end | Male thread, Female thread |
| Design | Piston, Piston rod, Profile barrel |
| Position detection | Via proximity switch |
| Variants | Advancing stroke adjustment, Weld spatter protection, Extended male piston rod thread, Piston rod with external hexagon, Low friction for balancer applications, Metal scraper, Module for reaching a specific end position in case of a pressure failure, Reinforced piston rod, Uniform, slow movement, Low friction, Through, hollow piston rod, Sensor slots on 3 profile sides, Additional PTFE piston guide |
| Mode of operation clamping unit | retracting, advancing, static, Released through compressed air, Frictional clamping with spring force |
| Static holding force of clamping unit | 7500 N |
| Axial backlash of clamping unit | 1.8 mm |
| Clamping unit release pressure | 3 bar |
| Operating pressure | 0.05 ... 10 bar |
| Mode of operation | Double-acting |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) | To UK EX instructions |
| Explosion protection | Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Explosion protection certification outside the EU | EPL Gb (GB) |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress, 3 - high corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L, VDMA24364 zone III |
| Ambient temperature | -40 ... 150 °C |
| Impact energy in end positions | 1.65 ... 3.3 J |
| Cushioning length | 0 ... 45 mm |
| Max. torque for protection against torsion | 3 Nm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 6881 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 6881 ... 7363 N |
| Additional weight per piston rod extension of 10 mm | 63 g |
| Additional weight per piston rod thread extension of 10 mm | 41 g |
| Type of mounting | With female thread, With accessories |
| Pneumatic connection | G1/2 |
| Note on materials | RoHS compliant |
| Material cover | Coated die-cast aluminium |
| Material spring | Spring steel |
| Clamping unit housing material | Anodised wrought aluminium alloy |
| Material housing end-position locking | Anodised wrought aluminium alloy |
| Material piston seal | Fluoro rubber, HNBR, TPE-U(PU) |
| Material clamping jaws clamping unit | Brass |
| Piston clamping unit material | POM |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel, hard chrome-plated, High-alloy steel, High-alloy stainless steel |
| Material piston rod wiper | Fluoro rubber, HNBR, Packaging unit, TPE-U(PU) |
| Buffer seal material | Fluoro rubber, TPE-U(PU) |
| Material of cushioning boss | Aluminium, POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel |
| Material rod wiper | Brass, PTFE-reinforced, TPE-E |
| Material bearing | Bronze, Metal polymer compound, POM |
| Material collar screws | Galvanised steel |
| Weight | 8 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DSBC-...-125- - |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
