Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure regulator Standard with pressure gauge, size 4, G 1 1/2, 0.1 to 3 bar, type 637.55 A - Riegler 100828
For circuits that need a regulated pressure of 0.1 to 3 bar: pressure regulator Standard with G 1 1/2 port. It delivers up to 16500 l/min flow and accepts inlet pressure up to 25 bar.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The outlet pressure of the pressure regulator Standard can be set between 0.1 and 3 bar, with connection via G 1 1/2. The manufacturer states 16500 l/min flow, measured at P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar.
Benefits
- Control range 0.1 to 3 bar, set steplessly
- Flow rate 16500 l/min at P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar
- Independent of inlet pressure: the working pressure stays stable at inlet pressures up to 25 bar
- Secondary venting automatically releases excess outlet pressure
- Body in die-cast zinc, painted silver, seals in NBR
- Medium temperature -10 to 60 °C
Applications
A typical job is supplying cylinders, valves and air tools with a steady pressure of 0.1 to 3 bar. Medium: compressed air, neutral gases, -10 to 60 °C.
Technical data
| Type | 637.55 A |
|---|---|
| Article number | 100828 |
| Series | Standard |
| Size | 4 |
| Thread | G 1 1/2 |
| Control range | 0.1 to 3 bar |
| Maximum inlet pressure | 25 bar |
| Flow rate | 16500 l/min |
| Flow measured | P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| Medium | compressed air, neutral gases |
| Medium temperature | -10 to 60 °C |
| Ambient temperature | -10 to 60 °C |
| Gauge display range | 0 to 4 bar |
| Secondary venting | yes |
| Body | die-cast zinc, painted silver |
| Seal material | NBR |
| Nominal size DN | 35 mm |
| Dimension A | 125 mm |
| Dimension B | 252.5 mm |
| Dimension C | 52 mm |
| Dimension D | 200.5 mm |
| Weight | 2.517 kg |
| Manufacturer | Riegler |
| Hersteller-Nr | 637.55 A |
| EAN | 4047322108645 |
| Zolltarifnummer | 84811099 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Germany |
| Material | Die-cast zinc, painted silver |
| Nominal size DN [mm] | 35 |
| Size BG | 4 |
| Control range max. [bar] | 3 |
| Housing material | Die-cast zinc, painted silver |
| Inlet pressure max. [bar] | 25 |
| Flow rate [l/min] | 16500 |
| Druckregelbereich [bar] | 0,1 bis 3 |
| Manometeranzeige [bar] | 0 bis 4 |
| Medientemperatur [°C] | -10 bis 60 |
| Pneumatic connection | G1 1/2 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
User Manual
Accessories
Wear part set for pressure regulators series Standard size 4, G 1 1/4 and G 1 1/2, type 22.605.4 - Riegler 100846
Item RGL-100846Standard pressure gauge, plastic case, centre back connection, G 1/8 and G 1/4, Ø 40 to 63 mm, dual scale bar/psi, up to 25 bar - Riegler
Item RGL-K75Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.










