Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure regulator Standard with pressure gauge, size 4, G 1 1/4, 0.1 to 3 bar, type 637.50 A - Riegler 100825
The pressure regulator Standard lets you set a working pressure between 0.1 and 3 bar on a G 1 1/4 line. Key data: up to 16500 l/min flow, inlet pressure up to 25 bar.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Control range 0.1 to 3 bar, port G 1 1/4: the pressure regulator Standard brings line pressure down to the level the consumer actually needs. The manufacturer states 16500 l/min flow, measured at P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar.
Benefits
- Control range 0.1 to 3 bar, set steplessly
- Flow rate 16500 l/min at P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar
- Independent of inlet pressure: the working pressure stays stable at inlet pressures up to 25 bar
- Secondary venting automatically releases excess outlet pressure
- Body in die-cast zinc, painted silver, seals in NBR
- Medium temperature -10 to 60 °C
Applications
It is fitted in air service units or directly ahead of the consumer to set a sub-circuit to a pressure between 0.1 and 3 bar. Medium: compressed air, neutral gases, -10 to 60 °C.
Technical data
| Type | 637.50 A |
|---|---|
| Article number | 100825 |
| Series | Standard |
| Size | 4 |
| Thread | G 1 1/4 |
| Control range | 0.1 to 3 bar |
| Maximum inlet pressure | 25 bar |
| Flow rate | 16500 l/min |
| Flow measured | P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar |
| Medium | compressed air, neutral gases |
| Medium temperature | -10 to 60 °C |
| Ambient temperature | -10 to 60 °C |
| Gauge display range | 0 to 4 bar |
| Secondary venting | yes |
| Body | die-cast zinc, painted silver |
| Seal material | NBR |
| Nominal size DN | 25 mm |
| Dimension A | 125 mm |
| Dimension B | 252.5 mm |
| Dimension C | 52 mm |
| Dimension D | 200.5 mm |
| Weight | 2.523 kg |
| Manufacturer | Riegler |
| Hersteller-Nr | 637.50 A |
| EAN | 4047322108294 |
| Zolltarifnummer | 84811099 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Germany |
| Material | Die-cast zinc, painted silver |
| Nominal size DN [mm] | 25 |
| Size BG | 4 |
| Control range max. [bar] | 3 |
| Housing material | Die-cast zinc, painted silver |
| Inlet pressure max. [bar] | 25 |
| Flow rate [l/min] | 16500 |
| Druckregelbereich [bar] | 0,1 bis 3 |
| Manometeranzeige [bar] | 0 bis 4 |
| Medientemperatur [°C] | -10 bis 60 |
| Pneumatic connection | G1 1/4 |
| Temperaturbereich | -10-60 °C |
| Temperature (max.) | 60 |
Downloads
User Manual
Accessories
Wear part set for pressure regulators series Standard size 4, G 1 1/4 and G 1 1/2, type 22.605.4 - Riegler 100846
Item RGL-100846Standard pressure gauge, plastic case, centre back connection, G 1/8 and G 1/4, Ø 40 to 63 mm, dual scale bar/psi, up to 25 bar - Riegler
Item RGL-K75Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.










