Flow control valve with check function, exhaust air control, R 3/8", tube 8 mm, -0.95 to 1 bar

Screwed directly into the cylinder port, a function fitting saves tubing and space. This flow control valve with check function takes the thread R 3/8" and leads to a tube of 8 mm outside diameter. The push-in connector holds the tube with stainless steel gripping claws. The materials are body Nickel-plated brass / PBT, seal NBR, retaining claw stainless steel, cartridge ZnDC nickel-plated, release ring PBT. The operating pressure is stated as -0.95 to 1 bar.

Advantages

• Push-in connector for tube with 8 mm outside diameter, release works without tools through the release ring.
• Connection thread R 3/8" for screwing directly into the cylinder end cap.
• Materials body Nickel-plated brass / PBT, seal NBR, retaining claw stainless steel, cartridge ZnDC nickel-plated, release ring PBT, only silicone-free seals and lubricants are used during assembly.
• Operating pressure of -0.95 to 1 bar, which states the permissible range.
• Temperature range of 0 to +60 °C, suitable for production environments with changing load.

Applications

• Production environments within the temperature range 0 to +60 °C.
• Speed adjustment on pneumatic cylinders with 8 mm tube.
• Screwing directly into cylinder end caps with thread R 3/8".
• Avoiding the stick-slip effect on slow running actuators.