Throttle check valve, exhaust air metering, R 3/8", port D 10 mm, nickel-plated brass

To adjust the speed of a pneumatic cylinder, this throttle check valve is screwed straight into the R 3/8" cylinder port. The exhaust-metering version restricts the outgoing air while the incoming air passes unrestricted, so the piston moves evenly and free of the slip-stick effect. The operating pressure range covers -0,95 to 10 bar and the permitted temperature runs from 0 to +60 °C. A tube with an outside diameter of 10 mm is simply pushed in and held by a stainless steel gripping ring.

Benefits

• Exhaust metering for smooth cylinder motion across -0,95 to 10 bar
• Body in nickel-plated brass combined with PBT
• Stainless steel gripping ring for the D 10 mm push-in connection
• NBR seal suitable from 0 to +60 °C
• Throttle screw can be adjusted without tools
• Assembled exclusively with silicone-free seals and lubricants

Applications

• Speed setting on pneumatic cylinders in assembly lines
• Gentle extension of grippers and pushers in handling equipment
• Cycle time tuning in packaging and special purpose machinery
• Retrofitting existing cylinders with an R 3/8" female thread