Flow control valve with check function, G 1", 0 to 12 bar, -20 to +180 °C

This flow control valve with check function sets the flow volume in a compressed air line. The connection is G 1". The materials are body and adjusting needle 1.4436, seals FKM. The operating pressure is stated as 0 to 12 bar.

Advantages

• Temperature range of -20 to +180 °C, suitable for production environments with changing load.
• Media oiled and non-oiled compressed air, gases, aggressive gases and liquids, oils and water (50 µm), the valve needs no separate treatment.
• Dimensions H 64, L 95, T 64, so the design stays slim at the cylinder.
• Connection thread G 1" for screwing directly into the cylinder end cap.
• Materials body and adjusting needle 1.4436, seals FKM, only silicone-free seals and lubricants are used during assembly.

Technical data

Applications

• Matching forward and return stroke in cycled handling devices.
• Production environments within the temperature range -20 to +180 °C.
• Screwing directly into cylinder end caps with thread G 1".
• Avoiding the stick-slip effect on slow running actuators.