Valve terminal 1 Series, 8x 5/2-way single solenoid, M7 top-ported, CC-Link - E.MC

E.MC ESV fieldbus valve terminal (1 Series) for CC-Link: 8 valves, one bus connection, one M12 power supply. The controller addresses every solenoid directly and receives diagnostic messages back.

Advantages

• Straight onto CC-Link: bus connection M12 plug and M12 socket, 5-pin, A-coded, power via M12, no output card needed in the controller.
• Ports within easy reach: the M7 outlets sit on top of the valves, easy to get at during commissioning.
• Narrow build: 11.5 mm pitch per valve station, response time 15 ms or less at 5 bar.
• Reconfigurable: any station can later take a valve with one or two coils, including 5/3-way or 2x 3/2-way functions.
• Long service life: at least 40 million cycles, aluminium body and spool, NBR seals.

Applications

• Layouts with little room to the side, where the tubes leave upwards
• Pick-and-place and handling units with small-bore cylinders, short-stroke cylinders and grippers on 4 to 6 mm tubing
• Decentralised valve terminals right at the machine, integrated into an existing CC-Link network

Accessories

E.MC supplies M12 power cables, matching bus cables and blanking plates for unused stations.