Flow control valve with check function, exhaust air control, G 1/8", tube 6 mm, 0 to 10 bar

Screwed directly into the cylinder port, a function fitting saves tubing and space. This flow control valve with check function takes the thread G 1/8" and leads to a tube of 6 mm outside diameter. The push-in connector holds the tube with stainless steel gripping claws. The materials are body Nickel-plated brass / PA 66, release ring PA 66, seals NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated. The operating pressure is stated as 0 to 10 bar.

Advantages

• Push-in connector for tube with 6 mm outside diameter, release works without tools through the release ring.
• Connection thread G 1/8" for screwing directly into the cylinder end cap.
• Materials body Nickel-plated brass / PA 66, release ring PA 66, seals NBR, retaining claws stainless steel, cartridge ZnDC zinc-plated, only silicone-free seals and lubricants are used during assembly.
• Operating pressure of 0 to 10 bar, which states the permissible range.
• Temperature range of -20 to +80 °C, suitable for production environments with changing load.

Applications

• Production environments within the temperature range -20 to +80 °C.
• Speed adjustment on pneumatic cylinders with 6 mm tube.
• Screwing directly into cylinder end caps with thread G 1/8".
• Avoiding the stick-slip effect on slow running actuators.