3/2-way solenoid valve, normally open (NO), G 1/2, 3500 l/min, 12 V DC - YPC SF6701

This 3/2-way valve is normally open. As long as the coil is de-energised, full pressure is present at the outlet. Only the signal blocks the supply and exhausts the consumer. Flow at G 1/2 is 3500 l/min. The 12 V DC coil suits battery-powered equipment and small controls running on a 12 V supply.

Advantages

• Normally open, the consumer stays pressurised on power loss.
• 22 mm class F solenoid coil with 3-pin DIN connector, IP65, no polarity to observe.
• Body and spool in aluminium, NBR seals, pilot section in glass-fibre reinforced polyamide.
• 3500 l/min at 5 bar and an effective area of 65.0 mm², with G 1/2 on every port.

Applications

• Air that is present most of the time and only switched off occasionally, so the coil is mostly de-energised.
• Single-acting cylinders whose working position is the rest state of the machine.
• Clamping fixtures that must stay clamped on a power failure.

Accessories and spare parts

A matching replacement solenoid coil for 12 V DC is available separately and can be changed without opening the pneumatic circuit. Several valves can be grouped on SF6000 series manifolds with 2 to 10 stations, sharing a common G 1/2 supply and exhaust.

According to YPC the SF6000 series carries the CE mark and complies with RoHS.