Images are examples, some edited with AI. The technical data are authoritative. AI notice

Pneumatic angle gripper size 25, opening angle 30° DHWC-25-A-S-NO - Festo 8133477

Festo ✓ Original product Brand new

With 233.9 Ncm total gripping torque when closing at 6 bar, the angle gripper DHWC-25-A-S-NO opens its jaws at an angle. Opening angle up to 30°, repetition accuracy 0.1 mm, single-acting, normally open. Runs on 1.5 to 8 bar via M5 port. Gripping force retention when opening for secure holding.

Net
€394.88
excl. VAT
Item FES-8133477
Manufacturer no. DHWC-25-A-S-NO
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

233.9 Ncm total gripping torque when closing at 6 bar: that is what the size 25 angle gripper DHWC-25-A-S-NO provides. The jaws open at an angle. Version DHWC-25-A-S-NO: single-acting, normally open.

Benefits

  • 233.9 Ncm total gripping torque when closing at 6 bar
  • Repetition accuracy 0.1 mm, replacement accuracy 0.2 mm
  • Opening angle up to 30°, the jaws clear the working area
  • Closing time from 15 ms, opening time from 51 ms at 6 bar, operating frequency 2 Hz
  • Gripping force retention when opening
  • Corrosion resistance class CRC 0, ambient temperature -10 to 60 °C

Applications

Typical tasks for the DHWC-25-A-S-NO are assembly, feeding and pick-and-place in automated systems, at -10 to 60 °C ambient temperature. Position detection with proximity switches. For battery production with reduced Cu/Zn/Ni values (F1a), the DHWC-25-A-S-NO is a suitable choice.

Technical data

Size25
Max. replacement accuracy0.2 mm
Max. opening angle30°
Rotational symmetry0.2 mm
Repetition accuracy, gripper0.1 mm
Number of gripper jaws2
Drive systemPneumatic
Mounting positionAny
Mode of operationSingle-acting, normally open
Gripper functionAngular
Gripping force retentionDuring opening
DesignPositively driven motion sequence
Position detectionVia proximity switch
Operating pressure1.5 to 8 bar
Max. operating frequency of gripper2 Hz
Min. opening time at 6 bar51 ms
Min. closing time at 6 bar15 ms
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating mediumLubricated operation possible, after that always operate lubricated
Corrosion resistance class CRC0 - No corrosion stress
LABS (PWIS) conformityVDMA24364-B2-L
Suitability for the production of Li-ion batteriesSuitable for battery production with reduced Cu/Zn/Ni values (F1a)
Ambient temperature-10 to 60 °C
Total gripping torque, closing at 6 bar233.9 Ncm
Mass moment of inertia1087 kgcm²
Max. force on gripper jaw Fz static140 N
Max. torque at gripper Mx static2.2 Nm
Max. torque at gripper My static2.2 Nm
Max. torque at gripper Mz static2.2 Nm
Product weight363.5 g
Type of mountingDirect mounting via through-hole, Direct mounting via thread, Via through-hole and dowel pin, Via female thread and dowel pin
Pneumatic connectionM5
Note on materialsRoHS compliant
Cover cap materialWrought aluminium alloy, anodised
Housing materialAnodised wrought aluminium alloy
Gripper jaw materialHigh-alloy steel
ManufacturerFesto
Hersteller-NrDHWC-25-A-S-NO
EAN4052568567996
Zolltarifnummer84798997
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
ThreadM5
MediumCompressed air
Functionsingle-acting
Actuation typepneumatic
Betriebsdruck max [bar]8
Temperaturbereich-10-60 °C
Temperature (max.)60

Downloads

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

Customers Who Bought This Item Also Bought