Images are examples, some edited with AI. The technical data are authoritative. AI notice
Parallel gripper DHPC-32-A-B-2 - Festo 8116886
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Technical data
| Size | 32 |
|---|---|
| Stroke per gripper jaws | 11 mm |
| Max. replacement accuracy | 0.2 mm |
| Max. angular gripper jaw backlash ax, ay | 0 deg |
| Max. gripper jaw backlash Sz | 0 mm |
| Rotationally symmetrical | 0.2 mm |
| Repetition accuracy, gripper | 0.02 mm |
| Number of gripper jaws | 2 |
| Drive system | Pneumatic |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripper force back-up | None |
| Design | Flat mounting method for gripper fingers, Lever, Force pilot operated motion sequence |
| Guide | Ball guide |
| Position detection | Via proximity switch |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils. |
| Operating pressure | 1 ... 8 bar |
| Max. operating frequency of gripper | 1 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 114 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 107 ms |
| Max. mass per external gripper finger | 280 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Ambient temperature | -10 ... 60 °C |
| Total gripping force, opening, 0.6MPa (6bar, 87 psi) | 493.7 N |
| Total gripping force, closing, 0.6MPa (6bar, 87 psi) | 442.6 N |
| Gripper force per gripper jaw, opening, 0.6 MPa (6 bar, 87 psi) | 246.9 N |
| Gripper force per gripper jaw, closing, 0.6 MPa (6 bar, 87 psi) | 221.3 N |
| Mass moment of inertia | 5.51 kgcm² |
| Max. force on gripper jaw Fz static | 246.8 N |
| Max. torque at gripper Mx static | 6.29 Nm |
| Max. torque at gripper My static | 10.9 Nm |
| Max. torque at gripper Mz static | 6.29 Nm |
| Product weight | 774 g |
| Type of mounting | Either:, Direct mounting via through-hole, Direct mounting via thread, On mounting frame, Via through-hole and dowel pin, Via female thread and dowel pin |
| Pneumatic connection | M5 |
| Note on materials | RoHS compliant |
| Material housing | Anodised aluminium |
| Material gripper jaws | High-alloy stainless steel |
| Weight | 0.8 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DHPC-32-A-B-2 |
| EAN | 4052568564575 |
| Zolltarifnummer | 84798997 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
