Schwenkantrieb DFPD-9500-SY-Y-90-RD-F1625 - Festo 8211835

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 7988.6 Nm, size 9500, flange F1625 DFPD-9500-SY-Y-90-RD-F1625 - Festo 8211835

Name: Quarter turn actuator, double-acting, 7988.6 Nm, size 9500, flange F1625 DFPD-9500-SY-Y-90-RD-F1625 - Festo 8211835
Brand: Festo
SKU: FES-8211835
Price: 7195.06 EUR
Availability: InStock

Festo ✓ Original product Brand new

Double-acting quarter turn actuator with Scotch yoke mechanism for process valves with flange pattern F1625 to ISO 5211. At 4.63 bar nominal pressure the T55 shaft delivers 7988.6 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand. Weight 153 kg.

Net

€7,195.06

excl. VAT

Item FES-8211835

Manufacturer no. DFPD-9500-SY-Y-90-RD-F1625

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

The double-acting DFPD-9500-SY-Y-90-RD-F1625 turns process valves in both directions with compressed air and delivers 7988.6 Nm at 4.63 bar. It mounts via the F1625 hole pattern to ISO 5211, the T55 shaft, depth 57 mm engages the valve stem.

Benefits

7988.6 Nm torque across the 90° swivel angle at 4.63 bar
Valve interface to ISO 5211: flange F1625, shaft connection T55
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve, positioner and position sensor interface size AA 3
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6 Gb
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
Air consumption 408.8 l per switching cycle at 6 bar

Applications

The DFPD is intended for quarter-turn valves with top flange F1625, such as ball valves and butterfly valves in process plants. The ATEX rating II 2G/2D allows the DFPD-9500-SY-Y-90-RD-F1625 to be installed in zones 1 and 2 as well as zones 21 and 22. The DFPD-9500-SY-Y-90-RD-F1625 runs on compressed air to ISO 8573-1:2010 [7:3:4] within 3 to 4.6 bar. For sizing the valve bracket: product weight 153 kg.

Technical data

Order code	DFPD-9500-SY-Y-90-RD-F1625
Festo part number	8211835
Size of valve actuator	9500
Flange hole pattern	F1625
Swivel angle	90°
End-position adjustment range at 0°	-5 to 5°
End-position adjustment range at nominal swivel angle	-5 to 5°
Shaft connection depth	57 mm
Fitting connection conforms to standard	ISO 5211
Mounting position	any
Mode of operation	double-acting
Design	Scotch yoke
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standard	VDI/VDE 3845 size AA 3
Safety function	the safety function consists of the actuator switching to the specified safety switching position, This switching movement is achieved by pressurising the corresponding pressure chamber with compressed air, The value of the generated torque depends on the
Safety Integrity Level (SIL)	up to SIL 2 Low Demand mode, Up to SIL 3 in a redundant architecture
Certified for safety function to ISO 13849 and IEC 61508 (SIL)	Product can be used in SRP/CS up to SIL 2 (Low Demand), Up to SIL 3 in a redundant architecture
Burst pressure	13.89 bar
Operating pressure	3 to 4.6 bar
Nominal operating pressure	4.63 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
UKCA marking (see declaration of conformity)	to UK EX regulations
Explosion protection certification outside the EU	EPL Gb (GB)
Explosion protection	Zone 1 (ATEX), Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX)
Certificate issuing authority	German Technical Control Board (TÜV) Rheinland 968/V 2959.00/2025
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6 Gb
Explosion ignition protection type for dust	Ex h IIIC T85°C Db
Explosion ambient temperature	-20 to 80 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:3:4]
Note on operating and pilot medium	dew point at least 10 °C below the ambient temperature and temperature of the medium, Lubricated operation possible (in which case lubricated operation will always be required)
LABS (PWIS) conformity	VDMA24364 zone III
Storage temperature	-20 to 60 °C
Ambient temperature	-20 to 80 °C
Torque at nominal operating pressure and 0° swivel angle	7988.6 Nm
Torque at nominal operating pressure and 90° swivel angle	7988.6 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°	408.8 l
Product weight	153000 g
Shaft connection	T55
Pneumatic connection	G3/4
Note on materials	RoHS compliant
Material end cap	spheroidal graphite cast iron
Material stop screw	steel
Material seals	NBR
Material spring	spring steel
Material spring rod	steel
Material housing	spheroidal graphite cast iron
Material piston	spheroidal graphite cast iron
Material piston rod	steel
Material tie rod	steel
Material cylinder barrel	steel
Weight	188 kg
Manufacturer	Festo
Hersteller-Nr	DFPD-9500-SY-Y-90-RD-F1625
EAN	4052568769727
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Thread	G 3/4
Seal material	NBR
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Series	DFPD
Betriebsdruck max [bar]	4
Temperaturbereich	-20-80 °C
Temperature (max.)	80