Festo
Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-MW - Festo 8005004
Item FES-8005004
€945.87
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-MW-T6 - Festo 8005016
The DAPS-0240-090-R-F0710-MW-T6 turns ball valves and butterfly valves with flange F07/F10 in both directions using compressed air. At 5.6 bar nominal pressure the T22 shaft delivers 120 to 240 Nm. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 2.
Net
excl. VAT
€1,003.69
Item
FES-8005016
Manufacturer no.
DAPS-0240-090-R-F0710-MW-T6
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Double-acting quarter turn actuator with Scotch yoke mechanism for quarter-turn valves: 120 to 240 Nm torque at 5.6 bar, swivel angle 92°. Mounting is via flange F07/F10 (ISO 5211) and shaft connection T22, depth 24.8 mm.
Benefits
- Torque 120 to 240 Nm at 5.6 bar nominal pressure
- Valve interface to ISO 5211: flange F07/F10, shaft connection T22
- Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
- For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
- Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
- Corrosion resistance class CRC 2
Applications
Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F07/F10. Thanks to ATEX II 2G/2D, the size 0240 DAPS may be used in zones 1 and 2 as well as zones 21 and 22. The operating medium is compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar, nominal pressure 5.6 bar. For sizing the valve bracket: product weight 8 kg.
Technical data
| Order code | DAPS-0240-090-R-F0710-MW-T6 |
|---|---|
| Festo part number | 8005016 |
| Size of valve actuator | 0240 |
| Flange hole pattern | F07, F10 |
| Swivel angle | 92° |
| Shaft connection depth | 24.8 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | no cushioning |
| Mounting position | any |
| Mode of operation | double-acting |
| Design | Scotch yoke |
| Position detection | none |
| Closing direction | closes to the right |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Safety Integrity Level (SIL) | product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand |
| Operating pressure | 3 to 8.4 bar |
| Nominal operating pressure | 5.6 bar |
| CE mark (see declaration of conformity) | to EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust | Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature | -50 to 60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Corrosion resistance class CRC | 2 - moderate corrosion stress |
| Ambient temperature | -50 to 60 °C |
| Torque at nominal operating pressure and 0° swivel angle | 240 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 120 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 180 Nm |
| Air consumption at 6 bar per cycle 0°-90°-0° | 11.55 l |
| Product weight | 8000 g |
| Shaft connection | T22 |
| Pneumatic connection | G1/8 |
| Note on materials | contains paint-wetting impairment substances (PWIS), RoHS compliant |
| Material cover | wrought aluminium alloy |
| Material seals | FVMQ, PTFE-reinforced |
| Material housing | wrought aluminium alloy |
| Material screws | high-alloy steel |
| Material shaft | high-alloy steel |
| Material number shaft | 1.4305 |
| Weight | 8 kg |
| Manufacturer | Festo |
| Hersteller-Nr | DAPS-0240-090-R-F0710-MW-T6 |
| EAN | 4052568256654 |
| Zolltarifnummer | 84123900 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 1/8 |
| Seal material | FVMQ, PTFE-reinforced |
| Medium | Compressed air |
| Function | double-acting |
| Actuation type | pneumatic |
| Norm | ISO 5211, VDI/VDE 3845 |
| Certification | ATEX |
| Operating conditions | ISO 8573-1 |
| Series | DAPS |
| Betriebsdruck max [bar] | 8.4 |
| Temperature (max.) | 60 |
Downloads
Accessories
Festo
Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-T4 - Festo 8030607
Item FES-8030607
€534.18
Festo
Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-T6 - Festo 553178
Item FES-553178
€578.74
Festo
Quarter-turn actuator, double-acting, 240 Nm, flange F07/F10, ATEX DAPS-0240-090-R-F0710 - Festo 533422
Item FES-533422
€517.18
Festo
Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F05 DAPS-0240-090-R-F0507-CR - Festo 552873
Item FES-552873
€1,367.96
Festo
Quarter turn actuator, single-acting, spring return, size 0240, flange F10/F12 DAPS-0240-090-RS1-F1012-MW - Festo 8005042
Item FES-8005042
€1,459.39
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.