Semi-Rotary Drive DAPS-0240-090-R-F0710-T4 - Festo 8030607

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-T4 - Festo 8030607

Name: Quarter turn actuator, double-acting, 240 Nm, size 0240, flange F07/F10 DAPS-0240-090-R-F0710-T4 - Festo 8030607
Brand: Festo
SKU: FES-8030607
Price: 534.18 EUR
Availability: InStock

Festo ✓ Original product Brand new

The DAPS-0240-090-R-F0710-T4 turns ball valves and butterfly valves with flange F07/F10 in both directions using compressed air. At 5.6 bar nominal pressure it reaches 120 to 240 Nm across its 90° swivel range. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.

Net

€534.18

excl. VAT

Item FES-8030607

Manufacturer no. DAPS-0240-090-R-F0710-T4

Available

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

With up to 240 Nm at 5.6 bar nominal pressure, the size 0240 DAPS operates ball valves and butterfly valves with flange pattern F07/F10. Mounting is via flange F07/F10 (ISO 5211) and shaft connection T22, depth 24.8 mm.

Benefits

120 to 240 Nm torque across the 90° swivel angle at 5.6 bar
Valve interface to ISO 5211: flange F07/F10, shaft connection T22
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
End position at 0° adjustable by -1 to 9°
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand

Applications

It operates 90-degree valves with top flange F07/F10, for example ball valves or butterfly valves in pipelines. For hazardous areas: the actuator with flange F07/F10 is rated ATEX II 2G/2D for zones 1 and 2 as well as zones 21 and 22. The DAPS-0240-090-R-F0710-T4 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar. The product weight is 5.4 kg.

Technical data

Order code	DAPS-0240-090-R-F0710-T4
Festo part number	8030607
Size of valve actuator	0240
Flange hole pattern	F07, F10
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	24.8 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	double-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	3 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-20 to 150 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-20 to 150 °C
Torque at nominal operating pressure and 0° swivel angle	240 Nm
Torque at nominal operating pressure and 50° swivel angle	120 Nm
Torque at nominal operating pressure and 90° swivel angle	180 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	9.1 l
Product weight	5400 g
Shaft connection	T22
Pneumatic connection	G1/8
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FKM, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
Weight	5 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-0240-090-R-F0710-T4
EAN	4052568280673
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/8
Seal material	FKM, PTFE-reinforced
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperaturbereich	-20-150 °C
Temperature (max.)	150