Images are examples, some edited with AI. The technical data are authoritative. AI notice
Controller for CPX-E, EtherCAT, EtherCAT CoE protocol, 24 V DC, IP20 CPX-E-CEC-C1 - Festo 5226780
The controller CPX-E-CEC-C1 is a genuine Festo part for the CPX-E system. Festo specifies EtherCAT, EtherCAT CoE protocol, nominal operating voltage 24 V DC and power failure bridging 20 ms. Further data: transmission rate 100 Mbit/s and IP20 protection.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The controller CPX-E-CEC-C1 is a genuine Festo part for the CPX-E system. The main data are EtherCAT, EtherCAT CoE protocol and nominal operating voltage 24 V DC.
Advantages
- Fieldbus connection via EtherCAT, EtherCAT CoE
- Nominal operating voltage 24 V DC
- Power failure bridging 20 ms
- Transmission rate 100 Mbit/s
- IP20 degree of protection
- Suitable for ambient temperatures of -5 to 50 °C
Application
CPX-E-CEC-C1 is used when designing, extending and maintaining installations with the CPX-E system.
Technical data
| Type | CPX-E-CEC-C1 |
|---|---|
| Festo part number | 5226780 |
| Dimensions (W x L x H) | 42.2 mm x 76.5 mm x 125.8 mm |
| Grid dimension | 18.9 mm |
| Type of mounting | via DIN rail |
| Max. number of modules | 10 |
| Product weight | 145 g |
| Mounting position | Vertical, Horizontal |
| Ambient temperature | -5 to 50 °C |
| Note on ambient temperature | -5 - 60°C for vertical installation |
| Storage temperature | -20 to 70 °C |
| Relative air humidity | 95%, Non-condensing |
| Degree of protection | IP20 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Vibration resistance | Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Protection against direct and indirect contact | PELV |
| LABS (PWIS) conformity | VDMA24364 zone III |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK RoHS instructions |
| KC mark | KC-EMV |
| Approval | RCM, c UL us - Listed (Oil) |
| Certificate issuing authority | UL E239998 |
| Note on materials | RoHS compliant |
| Material housing | PA |
| Diagnostics via LED | Force mode, Module status, Network status, engineering port 1, Network status EtherCAT, Run, Power supply, electronics/sensors, Load power supply, System errors |
| Operator controls | DIP switch for RUN/STOP |
| IP address setting | DHCP, Via CODESYS |
| Fieldbus interface | Ethernet |
| Field bus, protocol | EtherCAT, EtherCAT CoE, EtherCAT EoE, EtherCAT FoE, EtherCAT master |
| Fieldbus interface, function | Bus connection continuing |
| Field bus, connection type | Socket |
| Field bus, connection system | RJ45 |
| Field bus, connection pattern | 8 |
| Field bus interface, electrical isolation | Yes |
| Field bus interface, transmission rate | 100 Mbit/s |
| Ethernet interface, connection type | Socket |
| Ethernet interface, protocol | EasyIP, Modbus TCP, OPC-UA, TCP/IP |
| Ethernet interface, function | Diagnostics |
| Ethernet interface, connection system | RJ45 |
| Ethernet interface, number of pins/wires | 8 |
| Ethernet interface, transmission rate | 10 Mbit/s, 100 Mbit/s |
| Max. address volume, inputs | 64 byte |
| Max. address volume, outputs | 64 byte |
| System parameters | Diagnostic memory, Fail-safe response, System start |
| Module parameters | Channel alarms for undervoltage, Process value representation of analogue modules |
| Configuration support | CODESYS V3 |
| Additional functions | CODESYS V3 |
| CPU data | Dual core 650 MHz |
| Power supply, function | Electronic system and sensors |
| Power supply, connection type | Terminal strip |
| Power supply, note on connection type | > 4 A and UL 2x terminal strip for power supply |
| Power supply, connection system | Spring-loaded terminal |
| Power supply, number of pins/wires | 4 |
| Nominal DC operating voltage, electronics/sensors | 24 V |
| Permissible voltage fluctuations for electronics/sensors | ± 25 % |
| Power supply, conductor diameter | 0.2 to 1.5 mm² |
| Power supply, note on conductor diameter | 0.2 - 2.5 mm² for flexible conductors without wire ferrule |
| Max. power supply | 8 A |
| Intrinsic current consumption at nominal operating voltage for electronics/sensors | Typically 65 mA |
| Power failure bridging | 20 ms |
| Reverse polarity protection | 24 V sensor supply against 0 V sensor supply |
| Programming software | CODESYS provided by Festo |
| Program memory | 12 MB user program |
| Processing time | Approx. 200 µs/1 k instruction |
| Function modules | And others, Read CPX-E module diagnostics, CPX-E diagnostic status, Copy CPX-E diagnostic trace |
| Buffering time real-time clock | 3 Wochen |
| Flag | 120 kB remanent data, CODESYS variable concept |
| Weight | 0.185 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CPX-E-CEC-C1 |
| EAN | 4052568421458 |
| Zolltarifnummer | 85371091 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Housing material | PA |
| Operating voltage | 24 V DC |
| Protection rating | IP20 |
| Temperature (max.) | 50 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







