Images are examples, some edited with AI. The technical data are authoritative. AI notice
Digital positioner double-acting 4 - 20 mA IP65 CMSX-P-SE-C-U-F1-D-50-A - Festo 8171507
The Festo CMSX-P-SE-C-U-F1-D-50-A digital positioner positions double-acting process actuators according to a setpoint signal of 0 - 10 V, 0 - 20 mA or 4 - 20 mA. Degree of protection IP65. Standard nominal flow rate 50 l/min. Works in a pressure range of 3 to 8 bar.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo CMSX-P-SE-C-U-F1-D-50-A digital positioner positions double-acting process actuators according to a setpoint signal of 0 - 10 V, 0 - 20 mA or 4 - 20 mA.
Key benefits
- Setpoint signal 0 - 10 V, 0 - 20 mA, 4 - 20 mA
- Standard nominal flow rate 50 l/min
- Works in a pressure range of 3 to 8 bar
- Display: 7-segment, LCD display, with backlighting
- Degree of protection IP65
Applications
It is used on process valves with pneumatic actuators, set up via display and buttons.
Technical data
| Type | CMSX-P-SE-C-U-F1-D-50-A |
|---|---|
| Festo part number | 8171507 |
| Design | Digital, electropneumatic positioner |
| Mode of operation | Double-acting |
| Design characteristics | Safety position - pneumatic outlet 4 exhausted, Safety position - pneumatic outlet 2 pressurised |
| Mounting position | Any |
| Type of mounting | With accessories |
| Functional principle of measuring system | Potentiometer |
| Display | 7-segment, LCD display, with backlighting |
| Setting options | Via display and buttons |
| Size of dead zone | 0.5 to 10 % |
| Operating pressure | 3 to 8 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible, Maximum particle size 40 µm |
| Standard nominal flow rate (standardised to DIN 1343) | 50 l/min |
| Pneumatic connection | G1/8 |
| Nominal operating voltage DC | 24 V |
| Operational voltage range DC | 21.6 to 26.4 V |
| Maximum current consumption | 600 mA |
| Reverse polarity protection | For operating voltage connections |
| Connection resistance | 80 kOhm |
| Analogue inputs, signal range | 0 - 10 V, 0 - 20 mA, 4 - 20 mA |
| Analogue inputs, maximum dynamic range | 0 - 24 mA, 0 - 11 V |
| Analogue inputs, linearity error at 25 °C | 0.5 % |
| Analogue inputs, temperature coefficient | 0.02 %FS/K |
| Analogue inputs, resolution | 16 bit |
| Analog inputs, overload protection | Yes |
| Analogue inputs, electrical isolation | No |
| Analogue outputs, signal range | 4 - 20 mA |
| Analogue outputs, maximum load impedance | 600 Ohm |
| Analogue outputs, linearity error at 25°C | 0.5% |
| Analogue outputs, temperature coefficient | 0.02 %FS/K |
| Analogue outputs, resolution | 12 bit |
| Analogue outputs, reverse polarity protection | Yes |
| Analog outputs, short circuit current rating | Yes |
| Analog outputs, overload protection | Yes |
| Analogue outputs, galvanic isolation | No |
| Characteristic for inputs | To IEC 61131-2, type 3 |
| Switching input | PNP, NPN |
| Digital inputs, reverse polarity protection | Yes |
| Digital inputs, electrical isolation | yes, optocoupler |
| Digital outputs, reverse polarity protection | Yes |
| Switching output | 3 x PNP or 3 x NPN, switchable |
| Digital outputs, output current | 100 mA |
| Digital outputs, short circuit current rating | Yes |
| Digital outputs, overload protection | Yes |
| Digital outputs, electrical isolation | yes, optocoupler |
| Electrical connection 1, function | 3x digital output, Analogue output, Analogue input, Digital input, Power supply, Power supply load |
| Electrical connection 1, connection type | Terminal strip |
| Electrical connection 1, connector system | Screw terminal |
| Electrical connection 1, number of connections/cores | 13 |
| Electrical connection 1, tightening torque | 0.6 Nm |
| Electrical connection 1, conductor cross section | 1.5 mm² |
| Electrical connection 2, function | External path/angle sensor |
| Electrical connection 2, connection type | Terminal strip |
| Electrical connection 2, connector system | Screw terminal |
| Electrical connection 2, number of connections/cores | 3 |
| Electrical connection 2, tightening torque | 0.6 Nm |
| Electrical connection 2, conductor cross section | 1.5 mm² |
| Cable fitting | M12 x 1.5 for electrical connection 2, M20 x 1.5 for electrical connection 1 |
| Permissible cable diameter | 3 - 6.5 mm for electrical connection 2, 7 - 13 mm for electrical connection 1 |
| Maximum cable length | 3 m for electrical connection 2, 30 m for electrical connection 1 |
| Ambient temperature | -5 to 60 °C |
| Storage temperature | -20 to 60 °C |
| Relative air humidity | 5 - 95%, Non-condensing |
| Degree of protection | IP65 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27, As per EN 60068-2-29 |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6, As per EN 60068-2-6 |
| Pollution degree | 3 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, in accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, to UK RoHS instructions |
| Material housing | Reinforced PC |
| Material sight glass | PC |
| Material base plate | Wrought aluminium alloy, anodised |
| Material shaft | High-alloy stainless steel |
| Material coupling | High-alloy stainless steel |
| Material screws | High-alloy stainless steel |
| Material seals | NBR |
| Material cable gland | PA |
| Material blanking plug | PA |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Note on materials | RoHS compliant |
| Product weight | 970 g |
| Dimensions (W x L x H) | 190 mm x 105 mm x 130 mm |
| Manufacturer | Festo |
| Hersteller-Nr | CMSX-P-SE-C-U-F1-D-50-A |
| EAN | 4052568616229 |
| Zolltarifnummer | 90328100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/8 |
| Seal material | NBR |
| Medium | Compressed air |
| Operating voltage | 24 V DC |
| Series | CMSX |
| Betriebsdruck max [bar] | 8 |
| Protection rating | IP65 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.






