Images are examples, some edited with AI. The technical data are authoritative. AI notice
Digital positioner double-acting 4 - 20 mA with HART IP66, IP67 CMSH-SE-VDE1-D-A-AL-G14-C1M20-HA - Festo 8097423
The Festo CMSH-SE-VDE1-D-A-AL-G14-C1M20-HA digital positioner positions double-acting process actuators according to a setpoint signal of 4 - 20 mA with HART. Degree of protection IP66, IP67. HART communication via the setpoint signal. Air capacity 270 l/min at Δp = 6 bar.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo CMSH-SE-VDE1-D-A-AL-G14-C1M20-HA digital positioner positions double-acting process actuators according to a setpoint signal of 4 - 20 mA with HART.
Why choose it
- Setpoint signal 4 - 20 mA with HART
- Air capacity 270 l/min at Δp = 6 bar
- Works in a pressure range of 1.4 to 8 bar
- Display: LCD display, via software 90° rotatable
- Degree of protection IP66, IP67
Areas of use
It is used on process valves with pneumatic actuators, set up via display and buttons.
Technical data
| Type | CMSH-SE-VDE1-D-A-AL-G14-C1M20-HA |
|---|---|
| Festo part number | 8097423 |
| Design | Digital, electropneumatic positioner |
| Mode of operation | Double-acting |
| Design characteristics | Safety pneumatic output 2 exhausted, Safety pneumatic output 4 pressurised |
| Mounting position | Any |
| Type of mounting | With accessories, in accordance with VDI/VDE 3845 |
| Functional principle of measuring system | External |
| Display | LCD display, via software 90° rotatable |
| Setting options | Via display and buttons |
| Cycle time | 20 ms |
| Nominal altitude of use | ≤ 2000 m NHN |
| Overvoltage category | II |
| Operating pressure | 1.4 to 8 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible, Maximum particle size 40 µm |
| Air flow rate at Δp = 6 bar | 270 l/min |
| Pneumatic connection | G1/4 |
| Reverse polarity protection | Yes |
| Connection resistance | 3 to 80 kOhm |
| Analogue inputs, signal range | 4 - 20 mA with HART |
| Analogue inputs, input impedance | 480 ohm at 20 mA |
| Analog inputs, overload protection | less than 65 mA |
| Analogue inputs, electrical isolation | Yes |
| Characteristic for inputs | 1x to IEC 61131-2, type 3 |
| Digital inputs, reverse polarity protection | Yes |
| Digital inputs, electrical isolation | Yes |
| Digital inputs, overload protection | 33 V |
| Electrical connection 1, function | Analogue input, Digital input, External path/angle sensor |
| Electrical connection 1, connection type | Terminal strip |
| Electrical connection 1, connector system | Spring-loaded terminal |
| Electrical connection 1, number of connections/cores | 7 |
| Cable fitting | 2x M20x1.5 |
| Maximum cable length | 30 m for external position sensor, Shielded |
| Ambient temperature | -40 to 80 °C |
| Note on ambient temperature | Display: -30 - 80 °C |
| Storage temperature | -40 to 80 °C |
| Climatic category | 1K5 to EN 60721 for storage, 4K3 to EN 60721 for operation |
| Degree of protection | IP66, IP67 |
| Shock resistance | Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Pollution degree | 3 |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, to EU Explosion Protection Directive (ATEX), in accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, to UK RoHS instructions |
| Material housing | Aluminium, powder-coated |
| Material sight glass | PC |
| Material screws | Galvanised steel |
| Material seals | EPDM, NBR, VMQ |
| LABS (PWIS) conformity | VDMA24364 zone III |
| Note on materials | RoHS compliant |
| Product weight | 2520 g |
| Weight | 2.7 kg |
| Manufacturer | Festo |
| Hersteller-Nr | CMSH-SE-VDE1-D-A-AL-G14-C1M20-HA |
| EAN | 4052568580193 |
| Zolltarifnummer | 90328100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Thread | G 1/4 |
| Medium | Compressed air |
| Betriebsdruck max [bar] | 8 |
| Protection rating | IP67 |
| Temperaturbereich | -40-80 °C |
| Temperature (max.) | 80 |
Downloads
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





