Pressure Reducing Valve 3DREA6-2X/315G24K31A1BM - Bosch Rexroth R901555341

If the reduced circuit works almost at system pressure, the control range must not stop short of it. The 3DREA6-2X/315G24K31A1BM is built for that case, following the 0...10 V voltage command, handling up to 60 l/min and withstanding 350 bar at the inlet.

Benefits

• 0...10 V command value through on-board electronics on 24 V DC, with no amplifier card.
• 350 bar maximum operating pressure at the inlet of this size 6 valve.
• 60 l/min maximum flow with subplate mounting to ISO 4401-03-02-0-05.
• 2 switching positions with 4 ports, spool symbol P to A.
• 3.6 kg weight, NBR seals for HL hydraulic fluid.

Applications

Intended for clamping and locking circuits with a high set pressure and low oil demand, for example hydraulic fixtures in toolmaking. Control comes from the analog output of the machine controller and the valve mounts on a subplate to ISO 4401-03-02-0-05.

Manufacturer

Bosch Rexroth, material number R901555341, product family (Z)3DRE(E)(A). The electrical connection is made through a 7-pole connector (6 + PE) to EN 175201-804.