Prop-Druckbegrenzung SVT DBEM10-7X/200G24K4M - Bosch Rexroth R901456189

Where every step of a cycle calls for a different pressure, manual readjustment costs cycle time and repeatability. The DBEM10-7X/200 sets pressure steplessly from an electrical command value, up to a pressure rating of 200 bar and at flows up to 275 l/min.

Benefits

• Pressure rating 200 bar, controlled steplessly by the command value of external electronics at 24 VDC supply voltage.
• Pilot-operated seat valve with symbol P to T, which keeps leakage low in the closed state.
• 275 l/min flow across 4 ports in size 10.
• Operating pressure up to 350 bar permissible, above the pressure rating that is set.
• 3.7 kg weight with NBR seals for hydraulic fluid of group HL.
• Connection diagram ISO 6264 for subplate mounting, wired through a 3-pole connector (2 + PE) according to EN 175301-803.

Technical data

Applications

Presses and clamping units are typical, where rapid traverse, pressing and holding each need a different pressure. The controller supplies the command value and the valve tracks it, so nobody has to walk up to the machine. On test benches the electrical command also replaces reworking of fixed pressure stages.

Manufacturer

Manufactured by Bosch Rexroth, material number R901456189.