Prop-Druckbegrenzung SVT DBEM10-7X/200XYG24-8K4M - Bosch Rexroth R901405480

A command signal from the control system replaces manual adjustment here. This build of the DBEM10-7X is rated at 200 bar and controls a flow of up to 275 l/min, with pilot supply and drain routed through their own ports.

Advantages

• Rated at 200 bar in a housing released for 350 bar operating pressure
• Pressure set by an electrical command signal from external digital electronics
• Flow up to 275 l/min in size 10
• Subplate mounting to ISO 6264 with four ports and separate pilot paths
• 24 VDC supply, 4.44 kg, NBR seals for HL fluid

Application

The 200 bar stage fits clamping circuits and feed drives whose consumers may not be loaded any higher. The command value can be changed several times within a cycle, for a soft start and full force during the working stroke. Separate pilot paths keep the control stage clear of the return line.

Manufacturer

Bosch Rexroth lists the item under material number R901405480 in the DBEM(E) product family.