Prop-Druckbegrenzung SVT DBEME10-7X/315YG24K31F1M - Bosch Rexroth R901401760

A relief setting just under the 350 bar maximum operating pressure leaves no room for coarse steps. The DBEME10-7X/315YG24K31F1M therefore works on the 315 bar pressure stage and controls it from a 4...20 mA current command.

Benefits

• 315 bar pressure stage below the 350 bar maximum operating pressure
• Up to 700 l/min flow in size 10 to ISO 6264
• 4...20 mA current command, low-noise signal transfer from the machine controller
• On-board electronics at 24 VDC, 7-pole (6 + PE) plug to EN 175201-804
• 4.62 kg, NBR seals, spool symbol P to T and P to Y, HL hydraulic fluid

Applications

The valve limits pressure in forging presses, stretching lines and test rigs that run close to the permitted maximum. The command can be reset from the controller for each test step. Pilot oil drains separately to tank through the Y port.

Manufacturer

Bosch Rexroth, material number R901401760. The valve belongs to the DBEM(E) series for subplate mounting to ISO 6264.