Prop-Druckbegrenzung SVT DBEM10-7X/315YG24-8K4M - Bosch Rexroth R901358171

Where the limiting pressure should come from the control system instead of a fixed spring setting, a proportional relief valve takes over. This size 10 version follows an electrical command value up to a pressure rating of 315 bar and relieves up to 275 l/min. The pressure stage is built as a seat valve and is driven by external digital electronics on 24 VDC.

Advantages

• Pressure rating 315 bar at a maximum operating pressure of 350 bar
• Flow up to 275 l/min in size 10
• Pilot-operated pressure stage in seat valve design
• Electrical command value through external digital electronics, 24 VDC supply
• Subplate mounting to ISO 6264 with four ports, weight 4.46 kg
• Connector, 3-pole (2 + PE) to EN 175301-803, NBR seals for HL hydraulic fluid

Technical data

Application

Presses, test rigs and clamping circuits call for a different limiting pressure at each step of the sequence. With an electrical command value the control system changes that figure inside the sequence, so nobody has to adjust the machine by hand. Subplate mounting to ISO 6264 places the valve straight onto a manifold. The pilot paths P to T and P to Y are fixed by the symbol.

Manufacturer

Bosch Rexroth lists the item as material number R901358171 in the DBEM(E) product family.