Proportional Directional Valve 4WRZE25W6-325-7X/6EG24ETK31/F1D3V - Bosch Rexroth R901204401

A 4 to 20 mA current signal survives long cable runs through a plant far better than a voltage command. That is what this build of the 4WRZE25W6-325 is made for, setting 325 l/min at up to 350 bar.

Benefits

• FKM seals matched to HL hydraulic fluid
• Subplate mounting to ISO 4401-08-08-0-05, size 25 interface, weight 20.64 kg
• Nominal flow 325 l/min with headroom up to 870 l/min for peak strokes
• Operating pressure up to 350 bar across all 4 ports
• Spool Symbol W6 with spool design, 3 switching positions

Applications

Typical hosts are large installations with many metres of cable between controller and valve, such as rolling mills or press lines. Internal pilot routing saves extra piping, the interface follows ISO 4401-08-08-0-05. The valve weighs 20.64 kg.

Manufacturer

Bosch Rexroth lists this product under material number R901204401. Every figure on this page comes from the manufacturer data, complete characteristic curves are in data sheet RE 29115.