Drill bush DIN 179 form B, short type, bore 2.5 mm, length 6 mm, outside dia 5 mm

For repeatable holes of 2.5 mm diameter this bush is seated in the drill plate by its ground outside diameter of 5 mm. The drill stays guided across 6 mm of length, and the bore is rounded on both sides.

Benefits

• Outside diameter of 5 mm as a ground seat in the drill plate
• Guide bore of 2.5 mm to DIN 179 for the matching tool
• Bore rounded on both sides to form B, so the bush can be fitted either way round
• Overall length of 6 mm in the short version of the range short, medium and long
• Guide length of about 2.4 drill diameters at 6 mm of length

Applications

• Fixed drill plates and hinged drilling jigs
• One-off and small batch production in mechanical engineering
• Drilling fitted holes on assemblies with a fixed hole position
• Inspection and marking templates in assembly

Standard and material

The design corresponds to DIN 179, form B. Case-hardening steel at 740 ± 80 HV 10 together with ground surfaces determines the service life of the bush.