Drill bush DIN 179 form B, bore 10.8 mm, length 12 mm, outside dia 18 mm, case-hardened steel

This drill bush guides tools of 10.8 mm diameter and keeps the drill axis in position over the full length of 12 mm. Within the range this 10.8 mm bore is available in the lengths short, medium and long, here in the short version with 12 mm.

Benefits

• Overall length of 12 mm in the short version of the three lengths short, medium and long
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Bore to form B, that is rounded on both sides
• Guide bore of 10.8 mm to DIN 179 for the matching drill
• Outside diameter of 18 mm as a ground seat in the jig plate
• Bore rounded on both sides, so the bush can be fitted either way round

Applications

• Holes in sheet metal, profiles and housings that have to be repeatable in position and diameter
• Maintenance and repair work when hole patterns are reworked
• Gauge making and prototype work in small batches
• Drilling jigs and drilling templates in series production

Standard and material

The bush is made to DIN 179 in form B, with the bore rounded on both sides. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.