Drill bush DIN 179 form A, bore 43 mm, length 30 mm, outside dia 62 mm, hardened steel

This drill bush guides tools of 43 mm diameter and keeps the drilling axis in position over the full length of 30 mm. The bore follows form A of DIN 179 and is therefore rounded on one side.

Benefits

• Overall length of 30 mm in the short version of the range short, medium and long
• Guide bore of 43 mm to DIN 179 for the matching tool
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground
• Bore rounded on one side to form A, with a fixed fitting direction in the jig
• Outside diameter of 62 mm as a ground seat in the drill plate
• Dimensions to DIN 179, so existing bushes can be replaced size for size

Applications

• Drilling jigs and drill templates in series production
• Jig and tool making
• Repeatable hole patterns in sheet metal, profiles and housings
• Maintenance work where hole patterns are reworked

Standard and material

The bush is made to DIN 179 in form A, and the bore is rounded on one side. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.