Elbow 3, Long, 90°, ET/ET - Riegler K1786

Elbow 3, Long, 90°, ET/ET. This range covers 7 variants from 3.71 EUR. Select the version you need above.

Available variants

Shared technical data

About Bends 90° and 45°

Elbows turn a threaded pipe run through 90° or 45° without bending or welding. Thread sizes run from Rp 1/4 female up to Rp 3 female, which covers small branch lines as well as main runs. All 109 items use ISO 7-1 threads.

What matters when choosing

• Thread 1 defines the size and runs from Rp 1/4 female to Rp 3 female. It follows the nominal bore of the connected pipe rather than the space available.
• Thread 2 determines the body style. Versions with R 3/8 male to R 2 male give the female/male transition elbow, two female threads from Rp 1/2 to Rp 1 1/2 give the plain connecting elbow between two nipples.
• The angle follows the routing. Use 90° for a tight change of direction, 45° where the turn should be flatter or where two elbows form an offset.
• The whole series uses ISO 7-1 threads. Parts with parallel threads cannot be screwed in directly and need an adapter.
• The material is black malleable cast iron B350-10 Design Symbol A throughout. A different material class, for drinking water for example, calls for a different fitting series.

Typical applications

• Changes of direction in threaded compressed air ring mains in workshops and production
• Pipework at compressor stations and air treatment units
• Plant construction with threaded pipe where welded bends are not an option
• Water and heating lines in commercial buildings
• Retrofits and rebuilds of existing lines, since the joint can be undone again

All 109 items are made of black malleable cast iron B350-10 Design Symbol A with threads to ISO 7-1. The stated country of origin is CN.