Everis BLQ4 non-spill blind mate coupling body, SAE-04 male thread 1/4", chrome-plated brass, EPDM - CPC BLQ4D30004

BLQ4D30004 is the body half of an Everis BLQ4 connection with 1/4" flow size and screws into the line via an SAE-04 male thread. The built-in valve closes as the halves part. CPC puts the loss at less than 0.025 cc per disconnect without pressure and less than 0.055 cc at 120 psi (8.3 bar).

Use in the data center

• Blind mate connection: the coupling engages as a server tray is pushed into the rack.
• Direct-to-chip cooling with cold plates, tied into the rack manifold.
• Hot-swap: trays can be pulled under pressure without draining the loop.

Benefits

• Disconnect under pressure: under 0.055 cc spillage at 8.3 bar, inclusion on connect below 0.025 cc.
• Axial engagement tolerance: full flow even when the halves are not completely seated.
• Redundant seals: a second barrier against leaks onto electronics.
• Friction-free valve: designed for long periods in the connected state, stainless steel valve spring.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis BLQ4 series datasheet is available under Downloads.