Everis BLQ4 non-spill blind mate coupling body, 1/2" SAE male thread, chrome-plated brass, EPDM - CPC BLQ4D30008

With its 1/2" SAE male thread, BLQ4D30008 is the BLQ4 coupling body for the largest threaded port in the range. The interface remains the 1/4" blind mate coupling, and its valve shuts on disconnect, losing less than 0.055 cc of coolant at 120 psi (8.3 bar) according to the manufacturer.

Use in the data center

• Link between the rack manifold and a server tray, made without tools as the tray goes into the rack.
• Feeding cold plates for direct-to-chip cooling through a line with a 1/2" port.
• Service while running: the tray is disconnected under pressure and the loop does not have to be drained.

Benefits

• Direct 1/2" port: no adapter needed between line and coupling.
• Drip-free under pressure: under 0.055 cc per disconnect at 8.3 bar, inclusion on connect below 0.025 cc.
• Two sealing stages: redundant seals add protection against leaks.
• Wide temperature window: -17 to 115 °C with EPDM seal and stainless steel valve spring.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis BLQ4 series datasheet is available under Downloads.