Straight female stud coupling, G 3/4", tube 20 S, zinc-plated steel, no nut or ring

The female stud coupling connects a precision tube through a cutting ring to a parallel G female thread. This version comes with female thread G 3/4" and tube connection 20 S (M30x2). A further figure is a temperature range of -40 to +120 °C. This version is supplied with heavy series and scope of delivery without nut and cutting ring.

Benefits

• Female thread G 3/4", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 20 S (M30x2) in the heavy series.
• Working pressure up to 400 bar in the straight through form.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

When rebuilding a line of the heavy series the male thread on the device stays as it is and only the coupling is changed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.