Straight female stud coupling, G 1/4", tube 10 L, zinc-plated steel, no nut or ring

In use, the female stud coupling connects a precision tube through a cutting ring to a parallel G female thread. It is produced from zinc-plated steel. The data give female thread G 1/4" and tube connection 10 L (M16x1.5). In addition the data give light series and scope of delivery without nut and cutting ring.

Benefits

• Female thread G 1/4", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 10 L (M16x1,5) in the light series.
• Working pressure up to 315 bar in the straight through form.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

In hydraulics the version in zinc-plated steel connects the tube to a gauge port or test point and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.