Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/3 mid-position exhausted, ISO 15407-2 18 mm, 24 V DC VSVA-B-P53EP-ZD-A2-1T1L - Festo 8031818
380 l/min standard nominal flow at -0.9 to 10 bar: solenoid valve 5/3 mid-position exhausted for mounting on sub-bases to ISO 15407-2 (18 mm). Coil 24 V DC with 1.6 W, electrical connection via 4-pin plug to ISO 15407-2.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-P53EP-ZD-A2-1T1L makes the actuator pressureless in mid-position, both working lines vent to exhaust. Standard nominal flow is 380 l/min at a size of 18 mm to ISO 15407-2.
Benefits
- Standardised: ISO 15407-2 in size 18 mm, the valve fits any sub-base of this standard and size.
- Flow rate: 390 l/min on a single sub-base, 380 l/min pneumatically linked and 460 l/min linked, flow-optimised.
- Pressure range: operating pressure -0.9 to 10 bar, so vacuum operation is possible, pilot pressure 3 to 10 bar.
- Electrics: 24 V DC, 1.6 W, 100 % duty cycle, tolerance ± 10 %.
- Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
Application
Pilot air is supplied externally, at 3 to 10 bar pilot pressure. Manual override detenting, non-detenting. The exhaust air can be throttled via flow control plate or single sub-base. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-P53EP-ZD-A2-1T1L |
|---|---|
| Festo part number | 8031818 |
| Valve function | 5/3 mid-position exhausted |
| Actuation type | electrical |
| Width | 18 mm |
| Standard nominal flow rate | 380 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Degree of protection | IP65, NEMA 4 |
| Exhaust function | can be throttled via flow control plate or single sub-base |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | detenting, non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | non-reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Pilot pressure | 3 to 10 bar |
| Flow rate valve on single sub-base | 390 l/min |
| Flow rate valve, pneumatically linked, flow-optimised | 460 l/min |
| Flow rate valve, pneumatically linked | 380 l/min |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1500 µs |
| Maximum negative test pulse with 1 signal | 800 µs |
| Nominal operating voltage DC | 24 V |
| Coil characteristics | 24 V DC: 1.6 W |
| Surge voltage resistance | 2.5 kV |
| Pollution degree | 3 |
| Permissible voltage fluctuations | ± 10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Relative humidity | 0 - 90 % |
| Ambient temperature | -5 to 50 °C |
| Product weight | 170 g |
| Electrical connection | 4-pin plug to ISO 15407-2 |
| Mounting type | on sub-base |
| Auxiliary pilot air port 12/14 | sub-base size 18 mm to ISO 15407-2 |
| Pilot exhaust port 82/84 | non-ducted, optionally ducted |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 18 mm to ISO 15407-2 |
| Note on materials | RoHS compliant |
| Seal material | FKM, NBR |
| Housing material | PA, die-cast aluminium |
| Screw material | galvanised steel |
| Reset method | mechanical spring, electrical actuation |
| Nominal size | 5 mm |
| Medium temperature | -5 to 50 °C |
| Noise level | 85 dB(A) |
| Maximum tightening torque, valve mounting | 0.8 to 1.2 Nm |
| Asymmetric switching time off | 30 ms for pilot side 14 |
| Asymmetric switching time on | 10 ms for pilot side 12, 13 ms for pilot side 14 |
| Weight | 0.18 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-P53EP-ZD-A2-1T1L |
| EAN | 4052568281977 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 5 |
| Medium | Compressed air |
| Function | 5/3 exhausted |
| Flow rate [l/min] | 380 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | ISO 15407-2 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3 mid-position exhausted, ISO 15407-2 26 mm, 24 V DC VSVA-B-P53EP-ZTR-A1-1T1L - Festo 8033035
Item FES-8033035Solenoid valve 5/3 mid-position exhausted, ISO 15407-2 26 mm, 24 V DC VSVA-B-P53EP-ZH-A1-1T1L - Festo 8033058
Item FES-8033058Solenoid valve 5/3 mid-position exhausted, ISO 15407-2 26 mm, 24 V DC VSVA-B-P53EP-Z-A1-1T1L - Festo 8033081
Item FES-8033081Solenoid valve 5/3 exhausted, ISO 15407-2, width 18 mm VSVA-B-P53EP-ZTR-A2-1T1L - Festo 8039190
Item FES-8039190Solenoid valve 5/3 exhausted, ISO 15407-2, width 18 mm VSVA-B-P53EP-ZH-A2-1T1L - Festo 8039191
Item FES-8039191Alternatives
Plug-in solenoid valve 2x 3/2 closed, monostable, ISO 15407-2 18 mm, 24 V DC VSVA-B-T32C-AZD-A2-1T1L - Festo 539176
Item FES-539176Plug-in solenoid valve 5/3 mid-position pressurised, ISO 15407-2 18 mm, 24 V DC VSVA-B-P53U-ZD-A2-1T1L - Festo 539186
Item FES-539186Plug-in solenoid valve 2x 2/2 closed, monostable, ISO 15407-2 18 mm, 24 V DC VSVA-B-T22C-AZD-A2-1T1L - Festo 561155
Item FES-561155Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.


