Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 5/2 monostable, ISO 15407-2 18 mm, 24 V DC, with position sensing VSVA-B-M52-MZD-A2-1T1L-APX-0.5 - Festo 573201

Festo ✓ Original product Brand new

Solenoid valve 5/2 monostable for sub-bases to ISO 15407-2 (18 mm): 550 l/min standard nominal flow at -0.9 to 10 bar operating pressure. Coil 24 V DC with 1.6 W, electrical connection via 4-pin plug to ISO 15407-2.

Net
€167.44
excl. VAT
Item FES-573201
Manufacturer no. VSVA-B-M52-MZD-A2-1T1L-APX-0.5
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The solenoid valve VSVA-B-M52-MZD-A2-1T1L-APX-0.5 drives double-acting actuators in both directions, the mechanical spring resets the valve without a signal. At size 18 mm (ISO 15407-2) it delivers 550 l/min standard nominal flow.

Benefits

  • Standard interface: port pattern to ISO 15407-2, size 18 mm, fits sub-bases to this standard.
  • Position sensing: an inductive sensor reports the normal position, switching output PNP, connection cable 0.5 m with plug M12x1, 4-pin.
  • Performance: flow rate 750 l/min at the valve, 600 l/min on a single sub-base, 550 l/min pneumatically linked and 700 l/min linked, flow-optimised.
  • Operating pressure -0.9 to 10 bar: vacuum can be switched as well, pilot pressure 3 to 10 bar.
  • Fast: switches on in 12 ms and off in 38 ms.
  • Coil data: 1.6 W at 24 V DC, voltage ± 10 %, 100 % duty cycle.

Application

The pilot stage can be supplied externally or internally. Manual override detenting, covered, non-detenting. For speed adjustment the exhaust can be throttled via flow control plate or single sub-base. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.

Technical data

TypeVSVA-B-M52-MZD-A2-1T1L-APX-0.5
Festo part number573201
Valve function5/2 monostable
Actuation typeelectrical
Width18 mm
Standard nominal flow rate550 l/min
Operating pressure-0.9 to 10 bar
Designpiston spool
CertificationC-Tick, CSA (OL), c UL us - Recognized (OL)
Degree of protectionIP65, NEMA 4
Exhaust functioncan be throttled via flow control plate or single sub-base
Sealing principlesoft
Mounting positionany
Manual overridedetenting, covered, non-detenting
Pilot controlpiloted
Pilot air supplyexternal or internal
Flow directionnon-reversible
Overlappositive overlap
Signal status displayLED
Pilot pressure3 to 10 bar
Flow rate valve750 l/min
Flow rate valve on single sub-base600 l/min
Flow rate valve, pneumatically linked, flow-optimised700 l/min
Flow rate valve, pneumatically linked550 l/min
Switching time off38 ms
Switching time on12 ms
Duty cycle100 %
Maximum positive test pulse with 0 signal1500 µs
Maximum negative test pulse with 1 signal800 µs
Nominal operating voltage DC24 V
Coil characteristics24 V DC: 1.6 W
Surge voltage resistance2.5 kV
Pollution degree3
Permissible voltage fluctuations± 10 %
Operating mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation)
Vibration resistancetransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceshock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Relative humidity0 - 90 %
Ambient temperature-5 to 50 °C
Product weight157 g
Electrical connection4-pin plug to ISO 15407-2
Mounting typeon sub-base
Auxiliary pilot air port 12/14sub-base size 18 mm to ISO 15407-2
Pilot exhaust port 82/84non-ducted, optionally ducted
Pneumatic connection 1, 2, 3, 4, 5sub-base size 18 mm to ISO 15407-2
Note on materialsRoHS compliant
Seal materialFKM, NBR
Housing materialPA, die-cast aluminium
Screw materialgalvanised steel
Reset methodmechanical spring
KC markKC EMC
CE marking (see declaration of conformity)to EU EMC Directive
Nominal size5 mm
Measuring principleinductive
Reverse polarity protection, sensorfor all electrical connections
Switching position sensingnormal position with sensor
Switching status display, sensorLED
Valve sensor switching time on32 ms
Valve sensor switching time off9 ms
Switching outputPNP
Medium temperature-5 to 50 °C
Noise level85 dB(A)
Maximum tightening torque, valve mounting0.8 to 1.2 Nm
Operating voltage range DC, sensor10 to 30 V
Short-circuit protection, sensorpulsed
No-load current, sensor≤ 10 mA
Maximum output current, sensor200 mA
Maximum switching frequency, sensor5000 Hz
Residual ripple, sensor± 10 %
Voltage drop, sensor≤ 2 V
Sensor connectioncable 0.5 m with plug M12x1, 4-pin
Switching element functionnormally closed contact
Weight0.185 kg
ManufacturerFesto
Hersteller-NrVSVA-B-M52-MZD-A2-1T1L-APX-0.5
EAN4052568219765
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Nominal size DN [mm]5
MediumCompressed air
Function5/2 monostable
Flow rate [l/min]550
Medientemperatur [°C]-5 bis 50
NormISO 15407-2
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
Operating voltage24 V DC
SeriesVSVA
Betriebsdruck max [bar]10
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Alternatives

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.