Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 5/3 mid-position exhausted, ISO 15407-1 18 mm, 230 V AC VSVA-B-P53E-ZH-A2-3AC1 - Festo 547245

Festo ✓ Original product Brand new

450 l/min standard nominal flow at -0.9 to 10 bar: solenoid valve 5/3 mid-position exhausted for mounting on sub-bases to ISO 15407-1 (18 mm). Coil 230 V AC, 2.9 VA pick-up and 2.1 VA holding power, connected via individual plug form C to EN 175301-803.

Net
€153.41
excl. VAT
Item FES-547245
Manufacturer no. VSVA-B-P53E-ZH-A2-3AC1
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The solenoid valve VSVA-B-P53E-ZH-A2-3AC1 makes the actuator pressureless in mid-position, both working lines vent to exhaust. At size 18 mm (ISO 15407-1) it delivers 450 l/min standard nominal flow.

Benefits

  • Standard interface: port pattern to ISO 15407-1, size 18 mm, fits sub-bases to this standard.
  • Short switching times: 18 ms on, 30 ms off, 20 ms changeover.
  • Coil data: 2.9 VA pick-up and 2.1 VA holding power at 230 V AC, voltage -15 % / +10 %, 100 % duty cycle.
  • Dust and jet-water protected: IP65 and NEMA 4, usable at -5 to 50 °C.
  • Air flow: 650 l/min at the valve, 500 l/min on a single sub-base and 450 l/min pneumatically linked.
  • Pressure range: operating pressure -0.9 to 10 bar, so vacuum operation is possible, pilot pressure 3 to 10 bar.

Application

External pilot air (3 to 10 bar) decouples the pilot stage from the working pressure. Manual override non-detenting. For speed adjustment the exhaust can be throttled. Mounts on a sub-base in any position. Operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.

Technical data

TypeVSVA-B-P53E-ZH-A2-3AC1
Festo part number547245
Valve function5/3 mid-position exhausted
Actuation typeelectrical
Valve size18 mm
Standard nominal flow rate450 l/min
Operating pressure-0.9 to 10 bar
Designpiston spool
Reset methodmechanical spring
Degree of protectionIP65, NEMA 4
Nominal size5 mm
Exhaust functioncan be throttled
Sealing principlesoft
Mounting positionany
Conforms to standardISO 15407-1, VDMA 24563
Manual overridenon-detenting
Pilot controlpiloted
Pilot air supplyexternal
Flow directionreversible
Overlappositive overlap
Signal status displayLED
Flow rate valve650 l/min
Flow rate valve on single sub-base500 l/min
Flow rate valve, pneumatically linked450 l/min
Switching time off30 ms
Switching time on18 ms
Duty cycle100 %
Coil characteristics230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA
Permissible voltage fluctuations-15 % / +10 %
Operating mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation)
Vibration resistancetransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceshock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Medium temperature-5 to 50 °C
Relative humidity0 - 90 %
Noise level85 dB(A)
Pilot mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 to 50 °C
Maximum tightening torque, valve mounting1 Nm
Product weight174 g
Electrical connectionpin pattern form C to EN 175301-803, with protective earth
Mounting typeon sub-base
Auxiliary pilot air ports 12, 14sub-base size 18 mm to ISO 15407-1
Pilot exhaust port 82/84ducted or non-ducted to standard
Pneumatic connection 1, 2, 3, 4, 5sub-base size 18 mm to ISO 15407-1
Pilot interfaceto ISO 15218
Note on materialsRoHS compliant
Seal materialHNBR, NBR
Housing materialdie-cast aluminium
Screw materialgalvanised steel
Changeover time20 ms
Pilot pressure3 to 10 bar
CE marking (see declaration of conformity)to EU Low Voltage Directive
Weight0.32 kg
ManufacturerFesto
Hersteller-NrVSVA-B-P53E-ZH-A2-3AC1
EAN4052568187613
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Nominal size DN [mm]5
MediumCompressed air
Function5/3 exhausted
Flow rate [l/min]450
Medientemperatur [°C]-5 bis 50
NormDIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
Operating voltage230 V AC
SeriesVSVA
Betriebsdruck max [bar]10
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Alternatives

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.