Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 5/3 mid-position exhausted, ISO 15407-1 26 mm, 110 V AC VSVA-B-P53E-ZH-A1-2AC1 - Festo 547204

Festo ✓ Original product Brand new

Solenoid valve 5/3 mid-position exhausted for sub-bases to ISO 15407-1 (26 mm): 1000 l/min standard nominal flow at -0.9 to 16 bar operating pressure. Electrical connection of the 110 V AC coil (2.9 VA pick-up and 2.1 VA holding power) is via form C pin pattern to EN 175301-803.

Net
€162.68
excl. VAT
Item FES-547204
Manufacturer no. VSVA-B-P53E-ZH-A1-2AC1
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The solenoid valve VSVA-B-P53E-ZH-A1-2AC1 removes pressure from both cylinder chambers in the mid-position. At size 26 mm (ISO 15407-1) it delivers 1000 l/min standard nominal flow.

Benefits

  • Standardised: ISO 15407-1 in size 26 mm, the valve fits any sub-base of this standard and size.
  • Built for the shop floor: degree of protection NEMA 4 and IP65, ambient temperature -5 to 50 °C.
  • Flow values: 1400 l/min at the valve, 1100 l/min on a single sub-base and 1000 l/min pneumatically linked.
  • Pressure range: operating pressure -0.9 to 16 bar, so vacuum operation is possible, pilot pressure 3 to 10 bar.
  • Fast: switches on in 23 ms and off in 58 ms, 35 ms changeover.
  • Solenoid coil: 110 V AC at 2.9 VA pick-up and 2.1 VA holding power, duty cycle 100 %. Voltage may fluctuate by -15 % / +10 %.

Application

Pilot air is supplied externally, at 3 to 10 bar pilot pressure. Manual override non-detenting. On the exhaust side the air can be throttled. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.

Technical data

TypeVSVA-B-P53E-ZH-A1-2AC1
Festo part number547204
Valve function5/3 mid-position exhausted
Actuation typeelectrical
Valve size26 mm
Standard nominal flow rate1000 l/min
Operating pressure-0.9 to 16 bar
Designpiston spool
Reset methodmechanical spring
Degree of protectionNEMA 4, IP65
Nominal size9 mm
Exhaust functioncan be throttled
Sealing principlesoft
Mounting positionany
Conforms to standardISO 15407-1, VDMA 24563
Manual overridenon-detenting
Pilot controlpiloted
Pilot air supplyexternal
Flow directionreversible
Overlappositive overlap
Signal status displayLED
Flow rate valve1400 l/min
Flow rate valve on single sub-base1100 l/min
Flow rate valve, pneumatically linked1000 l/min
Switching time off58 ms
Switching time on23 ms
Duty cycle100 %
Coil characteristics110 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA
Permissible voltage fluctuations-15 % / +10 %
Operating mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation)
Vibration resistancetransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceshock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Medium temperature-5 to 50 °C
Relative humidity0 - 90 %
Noise level85 dB(A)
Pilot mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 to 50 °C
Maximum tightening torque, valve mounting2 Nm
Product weight305 g
Electrical connectionpin pattern form C to EN 175301-803, with protective earth
Mounting typeon sub-base
Auxiliary pilot air ports 12, 14sub-base size 26 mm to ISO 15407-1
Pilot exhaust port 82/84ducted or non-ducted to standard
Pneumatic connection 1, 2, 3, 4, 5sub-base size 26 mm to ISO 15407-1
Pilot interfaceto ISO 15218
Note on materialsRoHS compliant
Seal materialHNBR, NBR
Housing materialdie-cast aluminium
Screw materialgalvanised steel
Changeover time35 ms
Pilot pressure3 to 10 bar
CE marking (see declaration of conformity)to EU Low Voltage Directive
Weight0.32 kg
ManufacturerFesto
Hersteller-NrVSVA-B-P53E-ZH-A1-2AC1
EAN4052568187200
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Nominal size DN [mm]9
MediumCompressed air
Function5/3 exhausted
Flow rate [l/min]1000
Medientemperatur [°C]-5 bis 50
NormDIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
Operating voltage110 V AC
SeriesVSVA
Betriebsdruck max [bar]16
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Alternatives

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.