Images are examples, some edited with AI. The technical data are authoritative. AI notice

Proportional flow control valve 20 to 1000 l/min G3/8 VPCF-6-L-8-G38-6-A4-E-EX2 - Festo 8041713

Festo ✓ Original product Brand new

Proportional flow control valve VPCF-6-L-8-G38-6-A4-E-EX2 for controlled flow rate setting from 20 to 1000 l/min. Setpoint via 4 - 20 mA, total accuracy 3 %FS, port G3/8, degree of protection IP65 and ATEX category II 3G. Genuine Festo part 8041713.

Net
€1,439.98
excl. VAT
Item FES-8041713
Manufacturer no. VPCF-6-L-8-G38-6-A4-E-EX2

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The proportional flow control valve VPCF-6-L-8-G38-6-A4-E-EX2 electrically controls the flow rate in the range 20 to 1000 l/min. The setpoint is specified via 4 - 20 mA. Operating pressure 1 to 6 bar, port G3/8.

Key benefits

  • Accurate control: total accuracy 3 %FS
  • Actual value feedback to the controller via analogue output 4 - 20 mA
  • For hazardous areas: ATEX category II 3G (gas)
  • PNP switching output for limit value signals
  • For harsh environments: degree of protection IP65, corrosion resistance class CRC 1
  • Display on the device: LED

Application

The operating medium is compressed air to ISO 8573-1:2010 [6:4:4]. Lubricated operation is not possible. The VPCF-6-L-8-G38-6-A4-E-EX2 is mounted direct mounting via through-hole, direct mounting via thread, mounting position: any. Permissible ambient temperature 0 to 50 °C. Electrical connection of the VPCF-6-L-8-G38-6-A4-E-EX2: M12x1, 8-pin, plug, A-coded.

Technical data

TypeVPCF-6-L-8-G38-6-A4-E-EX2
Festo part number8041713
Valve function3-way proportional flow control valve
DesignPiston gate valve, With integrated pressure sensors
Type of pilotingDirect
Type of actuationElectrical
Type of resetMagnetic spring
Flow directionNon-reversible
Mounting positionAny
Sealing principleHard
Nominal size6 mm
Short circuit current ratingYes
Display typeLED
Flow measuring range0 to 1000 l/min
Operating pressure1 to 6 bar
Flow rate control range20 to 1000 l/min
Note on the flow rate control rangeControl starts at 20 l/min, below this setpoint the flow control valve switches to the exhaust position, specified accuracy values refer to the flow control range of 50-1000 l/min
Repetition accuracy in ± %FS0.5 %FS
Absolute accuracy in ± %FS at room temperature3 %FS
Hysteresis FS0.8 %FS
Ambient temperature0 to 50 °C
Media temperature15 to 35 °C
Operating mediumCompressed air to ISO 8573-1:2010 [6:4:4]
Note on operating and pilot mediumLubricated operation not possible, Maximum particle size 5 µm
Degree of protectionIP65
Note on degree of protectionIn mounted state
ApprovalRCM
CE mark (see declaration of conformity)To EU EMC Directive, To EU Explosion Protection Directive (ATEX)
ATEX category gasII 3G
ATEX category dustII 3D
Explosion protection type gasEx nA IIC T5 X Gc
Explosion protection type dustEx tc IIIC T60°C X Dc
Explosion-proof ambient temperature0°C ≤ Ta ≤ +50°C
Note on materialsRoHS compliant
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC1 - Low corrosion stress
Nominal operating voltage DC24 V
Operational voltage range DC20.4 to 30 V
Residual ripple5%
Max. current consumption1.2 A
Current consumption with unloaded outputs150 mA
Switching outputPNP
Switching inputPNP
Current rating per output100 mA
Reverse polarity protectionFor operating voltage
Duty cycle100 %
Max. electrical power consumption36 W
Signal range analogue output4 - 20 mA
Signal range analogue input4 - 20 mA
Diagnostic functionDisplay via LED
Electrical connectionM12x1, 8-pin, plug, A-coded
Type of mountingDirect mounting via through-hole, Direct mounting via thread
Pneumatic connection, port 1G3/8
Pneumatic connection, port 2G3/8
Pneumatic connection, port 3G3/8
Product weight856 g
Material housingAnodised wrought aluminium alloy
Material sealsFluoro rubber, HNBR
Weight0.95 kg
ManufacturerFesto
Hersteller-NrVPCF-6-L-8-G38-6-A4-E-EX2
EAN4052568286132
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
ThreadG 3/8
Nominal size DN [mm]6
Seal materialFKM, HNBR
MediumCompressed air
Function3-way proportional flow control valve
Actuation typeElectrical
Medientemperatur [°C]15 bis 35
CertificationATEX
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
Operating voltage24 V DC
Betriebsdruck max [bar]6
Pneumatic connectionG3/8
Protection ratingIP65
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.