Images are examples, some edited with AI. The technical data are authoritative. AI notice
Proportional flow control valve 30 to 1500 l/min G3/8 VPCF-6-L-8-G38-10-A4-E-EX2 - Festo 8041715
Proportional flow control valve VPCF-6-L-8-G38-10-A4-E-EX2 for controlled flow rate setting from 30 to 1500 l/min. Setpoint via 4 - 20 mA, total accuracy 3 %FS, port G3/8, degree of protection IP65 and ATEX category II 3G. Genuine Festo part 8041715.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The proportional flow control valve VPCF-6-L-8-G38-10-A4-E-EX2 electrically controls the flow rate in the range 30 to 1500 l/min. The setpoint is specified via 4 - 20 mA. Operating pressure 1 to 10 bar, port G3/8.
Benefits at a glance
- Actual value feedback to the controller via analogue output 4 - 20 mA
- Accurate control: total accuracy 3 %FS
- For hazardous areas: ATEX category II 3G (gas)
- PNP switching output for limit value signals
- For harsh environments: degree of protection IP65, corrosion resistance class CRC 1
- Display on the device: LED
Application and mounting
The operating medium is compressed air to ISO 8573-1:2010 [6:4:4]. Lubricated operation is not possible. Mounting the VPCF-6-L-8-G38-10-A4-E-EX2: direct mounting via through-hole, direct mounting via thread, mounting position any. Permissible ambient temperature 0 to 50 °C. Electrical connection of the VPCF-6-L-8-G38-10-A4-E-EX2: M12x1, 8-pin, plug, A-coded.
Technical data
| Type | VPCF-6-L-8-G38-10-A4-E-EX2 |
|---|---|
| Festo part number | 8041715 |
| Valve function | 3-way proportional flow control valve |
| Design | Piston gate valve, With integrated pressure sensors |
| Type of piloting | Direct |
| Type of actuation | Electrical |
| Type of reset | Magnetic spring |
| Flow direction | Non-reversible |
| Mounting position | Any |
| Sealing principle | Hard |
| Nominal size | 6 mm |
| Short circuit current rating | Yes |
| Display type | LED |
| Flow measuring range | 0 to 1500 l/min |
| Operating pressure | 1 to 10 bar |
| Flow rate control range | 30 to 1500 l/min |
| Note on the flow rate control range | Control starts at 30 l/min, below this setpoint the flow control valve switches to the exhaust position, specified accuracy values refer to the flow control range of 75-1500 l/min |
| Repetition accuracy in ± %FS | 0.5 %FS |
| Absolute accuracy in ± %FS at room temperature | 3 %FS |
| Hysteresis FS | 0.8 %FS |
| Ambient temperature | 0 to 50 °C |
| Media temperature | 15 to 35 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible, Maximum particle size 5 µm |
| Degree of protection | IP65 |
| Note on degree of protection | In mounted state |
| Approval | RCM |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Explosion Protection Directive (ATEX) |
| ATEX category gas | II 3G |
| ATEX category dust | II 3D |
| Explosion protection type gas | Ex nA IIC T5 X Gc |
| Explosion protection type dust | Ex tc IIIC T60°C X Dc |
| Explosion-proof ambient temperature | 0°C ≤ Ta ≤ +50°C |
| Note on materials | RoHS compliant |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| Nominal operating voltage DC | 24 V |
| Operational voltage range DC | 20.4 to 30 V |
| Residual ripple | 5% |
| Max. current consumption | 1.2 A |
| Current consumption with unloaded outputs | 150 mA |
| Switching output | PNP |
| Switching input | PNP |
| Current rating per output | 100 mA |
| Reverse polarity protection | For operating voltage |
| Duty cycle | 100 % |
| Max. electrical power consumption | 36 W |
| Signal range analogue output | 4 - 20 mA |
| Signal range analogue input | 4 - 20 mA |
| Diagnostic function | Display via LED |
| Electrical connection | M12x1, 8-pin, plug, A-coded |
| Type of mounting | Direct mounting via through-hole, Direct mounting via thread |
| Pneumatic connection, port 1 | G3/8 |
| Pneumatic connection, port 2 | G3/8 |
| Pneumatic connection, port 3 | G3/8 |
| Product weight | 856 g |
| Material housing | Anodised wrought aluminium alloy |
| Material seals | Fluoro rubber, HNBR |
| Weight | 0.95 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VPCF-6-L-8-G38-10-A4-E-EX2 |
| EAN | 4052568286156 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Thread | G 3/8 |
| Nominal size DN [mm] | 6 |
| Seal material | FKM, HNBR |
| Medium | Compressed air |
| Function | 3-way proportional flow control valve |
| Actuation type | Electrical |
| Medientemperatur [°C] | 15 bis 35 |
| Certification | ATEX |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Betriebsdruck max [bar] | 10 |
| Pneumatic connection | G3/8 |
| Protection rating | IP65 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Proportional flow control valve 20 to 1000 l/min G3/8 VPCF-6-L-8-G38-6-V1-E-EX2 - Festo 8041714
Item FES-8041714Proportional flow control valve 20 to 1000 l/min G3/8 VPCF-6-L-8-G38-6-A4-E-EX2 - Festo 8041713
Item FES-8041713Proportional pressure regulator 0.1 to 10 bar VPPM-8F-L-1-F-0L10H-LK-S1 - Festo 8031112
Item FES-8031112Proportional pressure regulator 0.06 to 6 bar VPPM-8F-L-1-F-0L6H-LK-S1 - Festo 8031111
Item FES-8031111Proportional pressure regulator 0.02 to 2 bar VPPM-8F-L-1-F-0L2H-LK-S1 - Festo 8031110
Item FES-8031110Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

