Images are examples, some edited with AI. The technical data are authoritative. AI notice
Magnetoresistive proximity sensor for T-slot NAMUR NAMUR 5.0 m cable with open end in-line outlet ATEX SDBT-MS-20NL-ZN-E-5-LE-EX6 - Festo 579071
Detects the piston magnet without contact using the magnetoresistive principle and signals the cylinder position in drives with T-slot. Connection via 5.0 m cable with open end, cable suitable for robots, suitable for drag chains. A yellow LED shows the switching status directly on the sensor.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo magnetoresistive proximity sensor SDBT-MS-20NL-ZN-E-5-LE-EX6 senses end positions and intermediate positions on pneumatic cylinders and grippers and fits into the T-slot.
Benefits
- 0.2 mm repetition accuracy of the switching point
- Up to 330 Hz switching frequency
- Cable suitable for robots, suitable for drag chains, TPE-U(PUR) sheath
- In-line cable outlet, 5.0 m cable with open end
- IP65, IP68 protection, dust-tight and protected against continuous immersion
Applications
A common application is end position sensing on cylinders with magnetic pistons in assembly and handling systems. Mounting insertable into the slot from above, screwed tight.
Technical data
| Feature | Value |
|---|---|
| Type | SDBT-MS-20NL-ZN-E-5-LE-EX6 |
| Festo part number | 579071 |
| Design | for T-slot |
| Based on standard | EN 60947-5-6 |
| Approval | RCM mark |
| CE mark (see declaration of conformity) | to EU EMC Directive, to EU Explosion Protection Directive (ATEX) |
| KC mark | KC-EMV |
| Special characteristics | oil-resistant |
| Note on materials | halogen-free, copper and PTFE-free, RoHS-compliant |
| Measured variable | position |
| Measuring principle | magnetoresistive |
| Ambient temperature | -40 to 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | NAMUR |
| Switching element function | NAMUR |
| Switch-on time | below 1 ms |
| Switch-off time | below 1 ms |
| Max switching frequency | 330 Hz |
| Off-state current | 0.4 to 1 mA |
| Rated operating voltage DC | 8.2 V |
| Operating voltage range DC | 7.5 to 18 V |
| Reverse polarity protection | for all electrical connections |
| Electrical connection, connection type | cable |
| Electrical connection, connector system | open end |
| Electrical connection, number of pins/wires | 2 |
| Connection outlet direction | in-line |
| Cable test conditions | bending strength to Festo standard, test conditions on request |
| Cable length | 5.0 m |
| Cable characteristic | suitable for robots, suitable for drag chains |
| Cable sheath colour | blue |
| Cable sheath material | TPE-U(PUR) |
| Material insulating sheath | PP |
| Type of mounting | insertable into the slot from above, screwed tight |
| Max tightening torque | 0.6 Nm |
| Mounting position | any |
| Housing colour | black |
| Housing material | high-alloy stainless steel, reinforced PA |
| Switching status indication | yellow LED |
| Ambient temperature with moving cable | -20 to 85 °C |
| Degree of protection | IP65, IP68 |
| Wire ends | wire ferrule |
| ATEX category gas | II 1G |
| Ex ignition protection type gas | Ex ia IIC T4...T6 Ga |
| ATEX category dust | II 1D |
| Ex ignition protection type dust | Ex ia IIIC T135 °C Da |
| Explosion protection certification outside the EU | EPL Da (BR), EPL Da (IEC-EX), EPL Ga (BR), EPL Ga (IEC-EX) |
| Ex ambient temperature | T4: -20 °C ≤ Ta ≤ +85 °C, T6: -20 °C ≤ Ta ≤ +45 °C, T4, with fixed cable installation: -40 °C ≤ Ta ≤ +85 °C, T6, with fixed cable installation: -40 °C ≤ Ta ≤ +45 °C |
| Max input voltage Ui | 28 V |
| Max input current Ii | 0.25 A |
| Max input power Pi | T4: 350 mW, T6: 72 mW |
| Effective internal inductance Li | 30 µH |
| Effective internal capacitance Ci | 79 nF |
| Certificate issuing authority | DNV 17.0027 X, IECEx PTZ 18.0008X, PTZ 16 ATEX 0010 X |
| Residual ripple | 10 % |
| Weight | 0.09 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SDBT-MS-20NL-ZN-E-5-LE-EX6 |
| EAN | 4052568262952 |
| Zolltarifnummer | 85365019 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Colour | Black |
| Material | Stainless steel |
| Certification | ATEX, EN 60947-5-6 |
| Series | SDBT |
| Protection rating | IP65 |
| Temperature (max.) | 85 |
Downloads
Accessories
Connecting cable M8x1, 3-pin, 3-wire, socket, angled, open end 2.5 m SIM-M8-3WD-2,5-PSL-PU - Festo 159424
Item FES-159424Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





