Images are examples, some edited with AI. The technical data are authoritative. AI notice

Position transmitter Hall effect for T-slot sensing range ≤ 52 mm IO-Link 2.5 m cable with open end SDAS-MHS-M40-1L-PNLK-PN-E - Festo 8063975

Festo ✓ Original product Brand new

Captures the piston position continuously over a range of up to 52 mm instead of just two end positions. Resolution ≤ 0.02 mm, repetition accuracy 0.2 mm, two switching outputs (2x PNP or 2x NPN) and IO-Link.

Net
€74.96
excl. VAT
Item FES-8063975
Manufacturer no. SDAS-MHS-M40-1L-PNLK-PN-E-2.5#

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The Festo position transmitter SDAS-MHS-M40-1L-PNLK-PN-E sits in the T-slot of the drive and measures the position of the piston magnet using the Hall effect, sensing range ≤ 52 mm.

Benefits

  • ≤ 0.02 mm resolution for displacement
  • 0.2 mm repetition accuracy
  • Up to 3 m/s travel speed can be tracked
  • Setting via IO-Link, capacitive button
  • IP65, IP68 protection, dust-tight and protected against continuous immersion

Applications

For grippers and short-stroke cylinders where intermediate positions or part tolerances are monitored. Connection via 2.5 m cable with open end.

Technical data

FeatureValue
TypeSDAS-MHS-M40-1L-PNLK-PN-E
Festo part number8063975
Designfor T-slot
ApprovalRCM mark, c UL us - Listed (OL)
CE mark (see declaration of conformity)to EU EMC Directive
KC markKC-EMV
Certificate issuing authorityUL E232949
Note on materialshalogen-free, RoHS-compliant
Measured variableposition
Measuring principlemagnetic Hall
Sensing range≤ 52 mm
Ambient temperature-40 to 80 °C
Sampling interval, typical2 ms
Max travel speed3 m/s
Displacement resolution≤ 0.02 mm
Repetition accuracy0.2 mm
Switching output2x PNP or 2x NPN, adjustable
Switching element functionN/C or N/O, switchable
Switch-on timebelow 4 ms
Switch-off timebelow 4 ms
Max switching frequency125 Hz
Max switching output voltage DC30 V
Max output current50 mA
Max switching capacity DC1.5 W
Voltage dropbelow 0,5 V
Linearity error, typical, in ± mm±1 mm
Short circuit protectionyes
Overload protectionavailable
ProtocolI-Port, IO-Link
IO-Link, protocol versionDevice V 1.1
IO-Link, profileSmart Sensor Profile
IO-Link, function classesteach channel, diagnostics, identification, process data variable (PDV), switching signal channel (SSC)
IO-Link, communication modeCOM2 (38.4 kBaud)
IO-Link, SIO mode supportyes
IO-Link, port typeA
IO-Link, process data width IN2 Byte
IO-Link, process data content IN12-bit PDV (position value), 4-bit SSC (switching signal)
IO-Link, minimum cycle time2.5 ms
Operating voltage range DC10 to 30 V
Residual ripple10 %
Reverse polarity protectionfor all electrical connections
Electrical connection, connection typecable
Electrical connection, connector systemopen end
Electrical connection, number of pins/wires4
Connection outlet directionin-line
Cable test conditionsbending strength to Festo standard, drag chain 5 million cycles, bending radius 28 mm, torsional strength above 300 000 cycles, ±270°/0.1 m
Cable length2.5 m
Cable characteristicdrag chain and robot
Cable sheath colourgrey
Cable sheath materialTPE-U(PUR)
Type of mountinginsertable into the slot from above, screwed tight
Mounting positionany
Housing materialhigh-alloy stainless steel, reinforced PA
Switching status indicationyellow LED
Status indicationred LED
Setting optionsIO-Link, capacitive button
Ambient temperature with moving cable-20 to 70 °C
Degree of protectionIP65, IP68
Weight0.055 kg
ManufacturerFesto
Hersteller-NrSDAS-MHS-M40-1L-PNLK-PN-E-2.5#
EAN4052568442132
Zolltarifnummer90318020
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialStainless steel
Protection ratingIP65
Temperaturbereich-40-80 °C
Temperature (max.)80

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.