Images are examples, some edited with AI. The technical data are authoritative. AI notice
2/2-way solenoid valve NC, 100 l/min, width 10 mm, port QS-4, 24 V DC MHJ10-S-2,5-QS-4-MF - Festo 565515
The Festo solenoid valve MHJ10-S-2,5-QS-4-MF switches compressed air in the range 0.5 to 6 bar. Standard nominal flow rate 100 l/min, port QS-4. Housing reinforced PA, reinforced PPS, HNBR seals, coil 24 V DC: low current phase 2 W, high current phase 7 W.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
100 l/min standard nominal flow rate and operating pressure 0.5 to 6 bar: these are the key data of the Festo solenoid valve MHJ10-S-2,5-QS-4-MF. Design: poppet valve without return spring.
Benefits
- Operating pressure 0.5 to 6 bar
- Standard nominal flow rate 100 l/min
- Coil 24 V DC: low current phase 2 W, high current phase 7 W, 100 % duty cycle
- Housing material reinforced PA, reinforced PPS, seals HNBR
- Degree of protection IP65, corrosion resistance class CRC 2
- Width 10 mm, grid dimension 10.5 mm
Use and installation
The MHJ10-S-2,5-QS-4-MF operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation is not possible. Installation of the MHJ10-S-2,5-QS-4-MF: inline installation, with through-hole, mounting position any, electrical connection 3-wire, cable. The MHJ10-S-2,5-QS-4-MF operates at an ambient temperature of -5 to 60 °C and a medium temperature of -5 to 60 °C.
Technical data
| Feature | Value |
|---|---|
| Type | MHJ10-S-2,5-QS-4-MF |
| Festo part number | 565515 |
| Valve function | 2/2 closed monostable |
| Type of actuation | Electrical |
| Valve width | 10 mm |
| Standard nominal flow rate | 100 l/min |
| Operating pressure | 0.5 to 6 bar |
| Design | Poppet valve without return spring |
| Type of reset | Pneumatic spring |
| Degree of protection | IP65 |
| Grid dimension | 10.5 mm |
| Note on operation | Power supply must deliver at least 1.7 A without voltage drop, do not operate without flow, with block mounting and flow max. ambient temperature 45 °C. |
| Sealing principle | Hard |
| Mounting position | Any |
| Manual override | None |
| Type of piloting | Direct |
| Flow direction | Non-reversible |
| B value | 0.38 |
| C value | 0.40 l/sbar |
| Max. switching frequency | 1000 Hz |
| Shifting time on at 4 bar and 24 V in new condition | 0.8 ms |
| Shifting time off at 4 bar and 24 V in new condition | 0.4 ms |
| Shifting time on at 0.5 bar and 24 V in new condition | 0.8 ms |
| Shifting time off at 0.5 bar and 24 V in new condition | 0.5 ms |
| Shifting time on at 6 bar and 24 V in new condition | 0.9 ms |
| Shifting time off at 6 bar and 24 V in new condition | 0.4 ms |
| Tolerance of switching time off | +15 %/-25 % |
| Tolerance of switching time on | ±15 % |
| Operating voltage range DC | 21.6 to 26.4 V |
| Duty cycle | 100 % |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Limitation of ambient and medium temperature | Depending on the switching frequency |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 to 50 °C |
| Permissible surface temperature of solenoid | 120 °C |
| Medium temperature | -5 to 60 °C |
| Ambient temperature | -5 to 60 °C |
| Electrical connection | 3-wire, cable |
| Type of mounting | Inline installation, with through-hole |
| Pneumatic connection 1 | QS-4 |
| Pneumatic connection 2 | QS-4 |
| Note on materials | RoHS compliant |
| Material seals | HNBR |
| Material housing | Reinforced PA, reinforced PPS |
| Material screws | Steel |
| KC marking | KC-EMV |
| CE marking (see declaration of conformity) | To EU EMC Directive |
| Reverse polarity protection | For operating voltage |
| Additional functions | Spark suppression, holding current reduction with energy recovery, protective shutdown |
| Input resistance | 34 kOhm |
| Characteristic coil data | 24 V DC: low current phase 2 W, high current phase 7 W |
| Trigger signal range DC | 3 to 30 V |
| Note on pull-in current | 0.09 - 0.44 mA at a trigger signal of 3 - 15 V, 0.44 - 15.44 mA at a trigger signal of 15 - 30 V, linear rise |
| Permissible voltage fluctuations | ± 10 % |
| Cable length | 2.50 m |
| Material cable sheath | PUR |
| Weight | 0.11 kg |
| Manufacturer | Festo |
| Hersteller-Nr | MHJ10-S-2,5-QS-4-MF |
| EAN | 4052568100049 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| For hose OD [mm] | 4 |
| Seal material | HNBR |
| Medium | Compressed air |
| Function | 2/2 closed monostable |
| Flow rate [l/min] | 100 |
| Actuation type | Electrical |
| Medientemperatur [°C] | -5 bis 60 |
| Operating conditions | ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | MHJ10 |
| Betriebsdruck max [bar] | 6 |
| Pneumatic connection | QS-4 |
| Protection rating | IP65 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Accessories
Solenoid valve 2/2-way single solenoid, closed QS-6 MHJ10-S-2,5-QS-6-HF - Festo 567503
Item FES-567503Solenoid valve 2/2-way single solenoid, closed QS-6 MHJ10-S-2,5-QS-6-HF/LP - Festo 567798
Item FES-567798Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-MF - Festo 565513
Item FES-565513Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF - Festo 567502
Item FES-567502Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF/LP - Festo 567796
Item FES-567796Alternatives
Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF - Festo 567502
Item FES-567502Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

