Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-MF - Festo 565513
The MHJ10-S-2,5-MF switches compressed air as a 2/2-way valve (single solenoid, closed) and reaches 100 l/min standard nominal flow rate. Designed for 0.5 to 6 bar operating pressure, sub-base mounting and 10 mm width. Switching times 0.8 ms on and 0.4 ms off.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
With 100 l/min standard nominal flow rate, the solenoid valve MHJ10-S-2,5-MF switches as a 2/2-way valve (single solenoid, closed) at 0.5 to 6 bar operating pressure. It also offers sub-base mounting, 10 mm width and IP65 protection.
Benefits
- Flow: 100 l/min standard nominal flow rate at only 10 mm width
- Pressure range: 0.5 to 6 bar
- Switching times: 0.8 ms on, 0.4 ms off
- Switching frequency: up to 1000 Hz
- Rugged: IP65 protection, corrosion resistance class 2
- Temperature: -5 to 60 °C ambient
Applications
A switching frequency of up to 1000 Hz suits fast cycling tasks such as blow-off or sorting. Mounting: on sub-base, grid dimension 10.5 mm. Operating medium for the MHJ10-S-2,5-MF: compressed air to ISO 8573-1:2010 [7:4:4], lubricated operation not possible.
Technical data
| Type | MHJ10-S-2,5-MF |
|---|---|
| Festo part number | 565513 |
| Valve function | 2/2-way, single solenoid, closed |
| Type of actuation | electrical |
| Width | 10 mm |
| Standard nominal flow rate | 100 l/min |
| Operating pressure | 0.5 to 6 bar |
| Design | poppet valve without spring return |
| Reset method | pneumatic spring |
| Degree of protection | IP65 |
| Grid dimension | 10.5 mm |
| Operating note | power supply must be able to deliver at least 1.7 A without a voltage breakthrough, do not operate without flow, for block assembly with flow max. ambient temperature 45 °C. |
| Sealing principle | hard |
| Mounting position | any |
| Manual override | none |
| Type of piloting | direct |
| Flow direction | non-reversible |
| b value | 0.38 |
| C value | 0.40 l/sbar |
| Max. switching frequency | 1000 Hz |
| Switching time on at 4 bar and 24 V when new | 0.8 ms |
| Switching time off at 4 bar and 24 V when new | 0.4 ms |
| Switching time on at 0.5 bar and 24 V when new | 0.8 ms |
| Switching time off at 0.5 bar and 24 V when new | 0.5 ms |
| Switching time on at 6 bar and 24 V when new | 0.9 ms |
| Switching time off at 6 bar and 24 V when new | 0.4 ms |
| Tolerance switching time off | +15 %/-25 % |
| Tolerance switching time on | ±15 % |
| Operational voltage range DC | 21.6 to 26.4 V |
| Duty cycle | 100 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation not possible |
| Restrictions for environmental and media temperature | depending on the switching frequency |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Storage temperature | -20 to 50 °C |
| Permitted surface temperature magnet | 120 °C |
| Media temperature | -5 to 60 °C |
| Ambient temperature | -5 to 60 °C |
| Max. tightening torque for valve mounting | 0.70 Nm |
| Product weight | 75 g |
| Electrical connection | 3-wire, cable |
| Type of mounting | on sub-base |
| Pneumatic connection, port 1 | sub-base |
| Pneumatic connection, port 2 | sub-base |
| Note on materials | RoHS compliant |
| Material seals | HNBR |
| Material housing | PA reinforced, PPS reinforced |
| Material screws | steel |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | to EU EMC Directive |
| Reverse polarity protection | for operating voltage |
| Additional functions | spark suppression, holding current reduction with energy recovery, protection switch off |
| Input resistance | 34 kOhm |
| Coil characteristics | 24 V DC: low-current phase 2 W, high-current phase 7 W |
| Trigger signal range DC | 3 to 30 V |
| Information about incoming current | 0.09 - 0.44 mA at a trigger signal of 3 - 15 V, 0.44 - 15.44 mA at a trigger signal of 15 - 30 V, linear rise |
| Permissible voltage fluctuations | ± 10 % |
| Cable length | 2.50 m |
| Material cable sheath | PUR |
| Weight (shipping) | 0.095 kg |
| Weight | 0.095 kg |
| Manufacturer | Festo |
| Hersteller-Nr | MHJ10-S-2,5-MF |
| EAN | 4052568100032 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Seal material | HNBR |
| Medium | Compressed air |
| Function | 2/2 closed monostable |
| Flow rate [l/min] | 100 |
| Actuation type | Electrical |
| Operating conditions | ISO 8573-1 |
| Series | MHJ10 |
| Betriebsdruck max [bar] | 6 |
| Protection rating | IP65 |
| Temperaturbereich | -5-60 °C |
| Temperature (max.) | 60 |
Downloads
Accessories
Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF - Festo 567502
Item FES-567502Solenoid valve 2/2-way single solenoid, closed QS-6 MHJ10-S-2,5-QS-6-HF - Festo 567503
Item FES-567503Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF/LP - Festo 567796
Item FES-567796Solenoid valve 2/2-way single solenoid, closed QS-6 MHJ10-S-2,5-QS-6-HF/LP - Festo 567798
Item FES-567798Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-LF - Festo 572080
Item FES-572080Alternatives
Solenoid valve 2/2-way single solenoid, closed 10 mm width MHJ10-S-2,5-HF - Festo 567502
Item FES-567502Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

