Manifold base for 5/2-way and 5/3-way valves, 8 stations, G 1/4, for RV20 valves - E.MC

This manifold base from the E.MC V/RV Series Manifold combines 8 RV20 5/2-way and 5/3-way valves into one valve group. All stations share one supply channel with G 1/4 ports and exhaust is collected through 4x G 1/4.

Advantages

• 23 mm pitch to the E.MC datasheet: valves sit side by side and the valve bank stays narrow.
• Aluminium body with NBR seals, screws and seals for mounting the valves are included.
• 5/2 and 5/3 valves share the same interface according to E.MC, so both types can be mixed on one base.
• Common G 1/4 supply channel: one channel serves all 8 stations, no separate feed line or tee per valve.
• Collective exhaust through 4x G 1/4: fit 4 silencers or pipe the exhaust away from all valves at once.

Applications

• Double-acting cylinders, one 5/2-way valve per actuator on the base
• Actuators that must hold an intermediate position, using 5/3-way valves on the same stations
• Rotary and linear actuators of one machine supplied from a single valve group

Accessories and spare parts

Unused stations are closed with a matching blanking plate, supplied with seal and fixing screws for the 23 mm pitch. That way the base can be sized generously and filled later. Replacement seals with screws are available as a set for valve changes.