Compact guide cylinder with plain bearings, double-acting, 20 mm bore, 40 mm stroke, magnetic piston - E.MC

With a 20 mm bore and 40 mm stroke, this guide cylinder handles lifting and pushing tasks where the load acts on the side of the end plate. The guide rods run in self-lubricating plain bearings and the end plate accepts up to 123 N of lateral load. Port G 1/8, operating pressure 1.5 to 10 bar.

Advantages

• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 123 N and 2.39 Nm torque at the end plate at 40 mm stroke
• Rubber bumpers in both end positions, piston speed 30 to 500 mm/s
• Air port G 1/8 at the side or from below, the unused one is closed with a plug

Applications

• Positioning and indexing moves with side-acting loads
• Pressing and clamping small assemblies
• Raising and lowering workpiece carriers at assembly stations

Accessories and spare parts

A repair kit for guide cylinders with a 20 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.