Compact guide cylinder with plain bearings, double-acting, 16 mm bore, 100 mm stroke, magnetic piston - E.MC

This compact guide cylinder with a 16 mm bore and 100 mm stroke lifts, pushes and stops small parts without loading the piston rod sideways. Two guide rods running in plain bearings carry the end plate and hold it within ±0.10° non-rotating accuracy. Port M5, operating pressure 1 to 10 bar.

Advantages

• Non-rotating accuracy ±0.10° when retracted, provided by two steel guide rods
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 32 N and 0.58 Nm torque at the end plate at 100 mm stroke
• Mounting from the top, from below, at the rear or via the T-slot underneath

Applications

• Lifting units in pick-and-place modules with small grippers
• Pushing parts out of feeders
• Stoppers and separators on small-part transfer conveyors

Accessories and spare parts

A repair kit for guide cylinders with a 16 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.