Images are examples, some edited with AI. The technical data are authoritative. AI notice
Integrated drive EtherCAT, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-EC - Festo 8069730
The EMCA-EC-67-M-1TE-EC integrated drive combines EC motor, power stage and position controller and is controlled directly via EtherCAT. 0.45 Nm nominal torque, up to 0.91 Nm peak, EtherCAT interface and up to 64 position sets. Safe torque off (STO) to SIL 2 is integrated.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
EMCA-EC-67-M-1TE-EC integrated drive: 150 W rated power, 0.45 Nm nominal torque, 24 V DC supply, communication via EtherCAT.
Benefits
- Rated power 150 W, peak power 200 W
- Nominal torque 0.45 Nm, peak torque 0.91 Nm
- EtherCAT fieldbus, 64 position sets can be stored
- STO safety function, SIL 2, category 3, performance level d
- Single-turn absolute encoder, buffering with external battery: 6 months, without external battery: 3 - 7 days
- 2 digital inputs, 2 digital outputs 24 V DC, degree of protection IP54
Application
Suitable for format adjustment, feed systems and positioning axes with up to 64 stored sets. Supplied with 24 V DC directly at the machine.
Technical data
| Type | EMCA-EC-67-M-1TE-EC |
|---|---|
| Festo part no. | 8069730 |
| Weight | 2.7 kg |
| Controller operating mode | PWM MOSFET power stage, P position controller, cascade controller with PI speed controller, proportional and integral current controller |
| Rotor position sensor, encoder measuring principle | Magnetic |
| Protective function | I²t monitoring, following error monitoring, software end position detection, power failure detection, current monitoring, temperature monitoring |
| Safety function | Safe torque off (STO) |
| Safety integrity level (SIL) | Safe torque off (STO) / SIL 2 |
| Performance level (PL) | Safe torque off (STO) / category 3, performance level d |
| Display | LED |
| Maximum rotational speed | 3300 1/min |
| Rotor position sensor | Absolute encoder, single-turn |
| Protocol | EtherCAT |
| Communication profile | CiA402, FHPP |
| Nominal rotary speed | 3150 1/min |
| Braking resistor, external | 6 Ohm |
| Diagnostic coverage | 90 % |
| Properties of digital logic outputs | Partially freely configurable, not galvanically isolated |
| Hardware fault tolerance | 1 |
| Maximum current of digital logic outputs | 100 mA |
| Maximum positive test pulse with 0 signal | 10000 µs |
| Maximum negative test pulse with 1 signal | 600 µs |
| Nominal power rating of motor | 150 W |
| Nominal voltage DC | 24 V |
| Nominal current | 7.2 A |
| Parameterisation interface | Ethernet |
| SFF safe failure fraction | >, 90 % |
| Maximum number of position sets | 64 |
| Rotor position transducer resolution | 12 Bit |
| Peak power motor | 200 W |
| Peak current | 10.3 A |
| Permissible voltage fluctuations | ± 20 % |
| Approval | RCM mark, c UL us - Recognized (OL) |
| KC mark | KC EMC |
| Certificate issuing authority | TÜV 01/205/5514.00/16, UL E331130 |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Machinery Directive |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Storage temperature | -25 to 70 °C |
| Relative air humidity | 0 - 95 %, non-condensing |
| Degree of protection | IP54 |
| Ambient temperature | 0 to 50 °C |
| Note on ambient temperature | Above an ambient temperature of 20 °C, a power reduction of 1.75 % per °C must be observed |
| Rotor mass moment of inertia | 0.301 kgcm² |
| Nominal torque | 0.45 Nm |
| Peak torque | 0.91 Nm |
| Permissible axial shaft load | 60 N |
| Permissible radial shaft load | 100 N |
| PFH (probability of failure per hour) | 1 x 10E-9 |
| PFD (probability of failure on demand) | 1.86 x 10E-5 |
| Proof test interval | 20 years |
| Product weight | 2260 g |
| Number of digital logic outputs 24 V DC | 2 |
| Number of digital logic inputs | 2 |
| Logic input specification | Based on IEC 61131-2 |
| Working range of logic input | 24 V |
| Logic input properties | Galvanically connected to logic potential |
| Ethernet, supported protocols | TCP/IP |
| Switching logic at inputs | PNP (positive switching) |
| Switching logic at outputs | PNP (positive switching) |
| Mounting type | With through-hole, screwed on |
| Note on materials | Contains PWIS (LABS) substances, RoHS compliant |
| Operating time of absolute encoder | With external battery: 6 months, without external battery: 3 - 7 days |
| Configuration support | ESI file |
| Minimum cycle time | 2 ms |
| Topologies | Line, ring, star |
| Additional functions | Distributed clocks, emergency message, variable PDO mapping, CoE (CSP only) |
| Baud rate | 10/100 Mbit/s (full/half duplex) |
| Media redundancy | Ring redundancy |
| Manufacturer | Festo |
| Hersteller-Nr | EMCA-EC-67-M-1TE-EC |
| EAN | 4052568297947 |
| Zolltarifnummer | 85013100 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | EtherCAT, Singleturn-Absolutwertgeber |
| Norm | DIN EN 61131-2 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Operating voltage | 24 V DC |
| Series | EMCA |
| Protection rating | IP54 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Braking resistor 72 Ohm, 200 W nominal power CACR-LE2-72-W500 - Festo 1336611
Item FES-1336611Braking resistor 100 Ohm, 200 W nominal power CACR-LE2-100-W500 - Festo 1336615
Item FES-1336615Braking resistor 67 Ohm, 720 W nominal power CACR-KL2-67-W1800 - Festo 1336617
Item FES-1336617Braking resistor 33 Ohm, 1440 W nominal power CACR-KL2-33-W2400 - Festo 1336619
Item FES-1336619Memory card for motors and controllers CAMC-M-S-F10-V1 - Festo 1436343
Item FES-1436343Integrated drive Ethernet/IP, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-EP - Festo 8061202
Item FES-8061202Integrated drive PROFINET, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-PN - Festo 8069726
Item FES-8069726Show 3 more items
Integrated drive Modbus TCP, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-DIO - Festo 8061197
Item FES-8061197Integrated drive CANopen, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-CO - Festo 8034239
Item FES-8034239Integrated drive EtherCAT, 150 W, 0.45 Nm nominal torque, multi-turn encoder EMCA-EC-67-M-1TM-EC - Festo 8069732
Item FES-8069732Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





