Images are examples, some edited with AI. The technical data are authoritative. AI notice

Integrated drive Modbus TCP, 150 W, 0.45 Nm nominal torque, single-turn encoder EMCA-EC-67-M-1TE-DIO - Festo 8061197

Festo ✓ Original product Brand new

The EMCA-EC-67-M-1TE-DIO integrated drive combines EC motor, power stage and position controller and is controlled directly via Modbus TCP. 0.45 Nm nominal torque, up to 0.91 Nm peak, Modbus TCP interface and up to 64 position sets. Safe torque off (STO) to SIL 2 is integrated.

Net
€1,155.96
excl. VAT
Item FES-8061197
Manufacturer no. EMCA-EC-67-M-1TE-DIO
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

150 W rated power at 3150 1/min, controller and Modbus TCP fieldbus on board: the Festo EMCA-EC-67-M-1TE-DIO is an integrated drive for 24 V DC.

Benefits

  • Rated power 150 W, peak power 200 W
  • Nominal torque 0.45 Nm, peak torque 0.91 Nm
  • Modbus TCP fieldbus, 64 position sets can be stored
  • STO safety function, SIL 2, category 3, performance level d
  • Single-turn absolute encoder
  • 11 digital inputs, 4 digital outputs 24 V DC, degree of protection IP54

Application

Suitable for format adjustment, feed systems and positioning axes with up to 64 stored sets. Supplied with 24 V DC directly at the machine.

Technical data

TypeEMCA-EC-67-M-1TE-DIO
Festo part no.8061197
Weight2.7 kg
Controller operating modePWM MOSFET power stage, P position controller, cascade controller with PI speed controller, proportional and integral current controller
Rotor position sensor, encoder measuring principleMagnetic
Protective functionI²t monitoring, following error monitoring, software end position detection, power failure detection, current monitoring, temperature monitoring
Safety functionSafe torque off (STO)
Safety integrity level (SIL)Safe torque off (STO) / SIL 2
Performance level (PL)Safe torque off (STO) / category 3, performance level d
DisplayLED
Maximum rotational speed3300 1/min
Rotor position sensorAbsolute encoder, single-turn
ProtocolModbus TCP
Communication profileFHPP
Nominal rotary speed3150 1/min
Braking resistor, external6 Ohm
Diagnostic coverage90 %
Properties of digital logic outputsPartially freely configurable, not galvanically isolated
Hardware fault tolerance1
Maximum current of digital logic outputs100 mA
Maximum positive test pulse with 0 signal10000 µs
Maximum negative test pulse with 1 signal600 µs
Nominal power rating of motor150 W
Nominal voltage DC24 V
Nominal current7.2 A
Parameterisation interfaceEthernet
SFF safe failure fraction&gt, 90 %
Maximum number of position sets64
Rotor position transducer resolution12 Bit
Peak power motor200 W
Peak current10.3 A
Permissible voltage fluctuations± 20 %
ApprovalRCM mark, c UL us - Recognized (OL)
KC markKC EMC
Certificate issuing authorityTÜV 01/205/5514.00/16, UL E331130
CE mark (see declaration of conformity)To EU EMC Directive, To EU Machinery Directive
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Storage temperature-25 to 70 °C
Relative air humidity0 - 95 %, non-condensing
Degree of protectionIP54
Ambient temperature0 to 50 °C
Note on ambient temperatureAbove an ambient temperature of 20 °C, a power reduction of 1.75 % per °C must be observed
Rotor mass moment of inertia0.301 kgcm²
Nominal torque0.45 Nm
Peak torque0.91 Nm
Permissible axial shaft load60 N
Permissible radial shaft load100 N
PFH (probability of failure per hour)1 x 10E-9
PFD (probability of failure on demand)1.86 x 10E-5
Proof test interval20 years
Product weight2260 g
Number of digital logic outputs 24 V DC4
Number of digital logic inputs11
Logic input specificationBased on IEC 61131-2
Working range of logic input24 V
Logic input propertiesGalvanically connected to logic potential
Ethernet, supported protocolsTCP/IP, Modbus TCP
Switching logic at inputsPNP (positive switching)
Switching logic at outputsPNP (positive switching)
Mounting typeWith through-hole, screwed on
Note on materialsContains PWIS (LABS) substances, RoHS compliant
ManufacturerFesto
Hersteller-NrEMCA-EC-67-M-1TE-DIO
EAN4052568290719
Zolltarifnummer85013100
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
AusführungModbus TCP, Singleturn-Absolutwertgeber
NormDIN EN 61131-2
Operating conditionsEN 60068-2-27, EN 60068-2-6
Operating voltage24 V DC
SeriesEMCA
Protection ratingIP54
Temperaturbereich0-50 °C
Temperature (max.)50

Downloads

Accessories

Show 3 more items

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.