Semi-Rotary Drive DAPS-1440-090-R-F14-T6 - Festo 553185

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 1440 Nm, size 1440, flange F14 DAPS-1440-090-R-F14-T6 - Festo 553185

Name: Quarter turn actuator, double-acting, 1440 Nm, size 1440, flange F14 DAPS-1440-090-R-F14-T6 - Festo 553185
Brand: Festo
SKU: FES-553185
Price: 2441.20 EUR
Availability: InStock

Festo ✓ Original product Brand new

The DAPS-1440-090-R-F14-T6 turns ball valves and butterfly valves with flange F14 in both directions using compressed air. At 5.6 bar nominal pressure it reaches 720 to 1440 Nm across its 90° swivel range. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3.

Net

€2,441.20

excl. VAT

Item FES-553185

Manufacturer no. DAPS-1440-090-R-F14-T6

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

With up to 1440 Nm at 5.6 bar nominal pressure, the size 1440 DAPS operates ball valves and butterfly valves with flange pattern F14. Flange pattern F14 to ISO 5211 and shaft connection T36, depth 38.5 mm fit directly onto the valve top.

Benefits

Torque 720 to 1440 Nm at 5.6 bar nominal pressure
Valve interface to ISO 5211: flange F14, shaft connection T36
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
End position at 0° adjustable by -1 to 9°
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand

Applications

It operates 90-degree valves with top flange F14, for example ball valves or butterfly valves in pipelines. ATEX category II 2G/2D permits use of the DAPS-1440 in zones 1 and 2 as well as zones 21 and 22. The DAPS-1440-090-R-F14-T6 runs on compressed air to ISO 8573-1:2010 [7:4:4] within 3 to 8.4 bar. The product weight is 23.4 kg.

Technical data

Order code	DAPS-1440-090-R-F14-T6
Festo part number	553185
Size of valve actuator	1440
Flange hole pattern	F14
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	38.5 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	double-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	3 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-50 to 60 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-50 to 60 °C
Torque at nominal operating pressure and 0° swivel angle	1440 Nm
Torque at nominal operating pressure and 50° swivel angle	720 Nm
Torque at nominal operating pressure and 90° swivel angle	1080 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	53.2 l
Product weight	23400 g
Shaft connection	T36
Pneumatic connection	G1/4
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FVMQ, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
Weight	23 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-1440-090-R-F14-T6
EAN	4052568195632
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/4
Seal material	FVMQ, PTFE-reinforced
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperature (max.)	60