Semi-Rotary Drive DAPS-1440-090-R-F12-T6 - Festo 553184

Images are examples, some edited with AI. The technical data are authoritative. AI notice

Quarter turn actuator, double-acting, 1440 Nm, size 1440, flange F12 DAPS-1440-090-R-F12-T6 - Festo 553184

Name: Quarter turn actuator, double-acting, 1440 Nm, size 1440, flange F12 DAPS-1440-090-R-F12-T6 - Festo 553184
Brand: Festo
SKU: FES-553184
Price: 2441.20 EUR
Availability: InStock

Festo ✓ Original product Brand new

The DAPS-1440-090-R-F12-T6 turns ball valves and butterfly valves with flange F12 in both directions using compressed air. Torque 720 to 1440 Nm at 5.6 bar, swivel angle 90°. Approvals and rating: ATEX II 2G/2D, suitable up to SIL 2 Low Demand, CRC 3. Rated for ambient temperatures of -50 to 60 °C.

Net

€2,441.20

excl. VAT

Item FES-553184

Manufacturer no. DAPS-1440-090-R-F12-T6

Question about this item

Datasheet (PDF)

Specialist dealer since 2009
Invoice payment for regular customers
Worldwide shipping
Technical questions clarified with the manufacturer

Description

With up to 1440 Nm at 5.6 bar nominal pressure, the size 1440 DAPS operates ball valves and butterfly valves with flange pattern F12. It mounts via the F12 hole pattern to ISO 5211, the T36 shaft, depth 38.5 mm engages the valve stem.

Benefits

Torque 720 to 1440 Nm at 5.6 bar nominal pressure
Valve interface to ISO 5211: flange F12, shaft connection T36
Valve interface to VDI/VDE 3845 (NAMUR) for direct mounting of a solenoid valve
For hazardous areas: ATEX II 2G and II 2D, ignition protection Ex h IIC T6...T3 Gb X
Suitable for safety-related control systems (SRP/CS) up to SIL 2 Low Demand
Corrosion resistance class CRC 3

Applications

Typical tasks are on/off actuation of ball valves, butterfly valves and plug valves with top flange F12. ATEX category II 2G/2D permits use of the DAPS-1440 in zones 1 and 2 as well as zones 21 and 22. Medium: compressed air to ISO 8573-1:2010 [7:4:4], permitted 3 to 8.4 bar, rated at 5.6 bar. The product weight is 23.4 kg.

Technical data

Order code	DAPS-1440-090-R-F12-T6
Festo part number	553184
Size of valve actuator	1440
Flange hole pattern	F12
Swivel angle	90°
End-position adjustment range at 0°	-1 to 9°
Shaft connection depth	38.5 mm
Fitting connection conforms to standard	ISO 5211
Cushioning	no cushioning
Mounting position	any
Mode of operation	double-acting
Design	Scotch yoke
Position detection	none
Closing direction	closes to the right
Valve connection conforms to standard	VDI/VDE 3845 (NAMUR)
Safety Integrity Level (SIL)	product can be used in SRP/CS up to SIL 2 Low Demand, product can be used in SRP/CS up to SIL 2 High Demand
Operating pressure	3 to 8.4 bar
Nominal operating pressure	5.6 bar
CE mark (see declaration of conformity)	to EU Explosion Protection Directive (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	Ex h IIC T6...T3 Gb X
Explosion ignition protection type for dust	Ex h IIIC T85°C...T200°C Db X
Explosion ambient temperature	-50 to 60 °C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	lubricated operation possible (then required for further operation)
Corrosion resistance class CRC	3 - high corrosion stress
Ambient temperature	-50 to 60 °C
Torque at nominal operating pressure and 0° swivel angle	1440 Nm
Torque at nominal operating pressure and 50° swivel angle	720 Nm
Torque at nominal operating pressure and 90° swivel angle	1080 Nm
Note on torque	The operating torque of the actuator must not exceed the maximum permissible torque listed in ISO 5211 for the size of the mounting flange and coupling
Air consumption at 6 bar per cycle 0°-90°-0°	53.2 l
Product weight	23400 g
Shaft connection	T36
Pneumatic connection	G1/4
Note on materials	contains paint-wetting impairment substances (PWIS), RoHS compliant
Material cover	wrought aluminium alloy
Material seals	FVMQ, PTFE-reinforced
Material housing	wrought aluminium alloy
Material screws	high-alloy steel
Material shaft	high-alloy steel
Material number shaft	1.4305
Weight	23 kg
Manufacturer	Festo
Hersteller-Nr	DAPS-1440-090-R-F12-T6
EAN	4052568195625
Zolltarifnummer	84123900
GPSR Herstellerdaten	Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
Artikelzustand	New
Artikel-Authentizität	Original product
Material	Aluminium
Thread	G 1/4
Seal material	FVMQ, PTFE-reinforced
Medium	Compressed air
Function	double-acting
Actuation type	pneumatic
Norm	ISO 5211, VDI/VDE 3845
Certification	ATEX
Operating conditions	ISO 8573-1
Series	DAPS
Betriebsdruck max [bar]	8.4
Temperature (max.)	60